Seagate ST1000LM014, ST93205620AS, ST92505610AS manual Environmental specifications

Page 18

2.10Environmental specifications

This section provides the temperature, humidity, shock, and vibration specifications for Momentus XT drives.

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.

Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating:

0°C to 60°C (32°F to 140°F)

 

 

Nonoperating:

–40°C to 70°C (–40°F to 158°F)

 

 

2.10.2Temperature gradient

Operating

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating

35°C per hour (95°F per hour max), without condensation

 

 

2.10.3Relative humidity

Operating

5% to 95% noncondensing (30% per hour max)

 

 

Nonoperating

5% to 95% noncondensing (30% per hour max)

 

 

2.10.4Wet bulb temperature

Operating

37.7°C (99.8°F max)

 

 

Nonoperating

40°C (104°F max)

 

 

2.10.5Altitude

Operating

–304.8 m to 3,048 m (–1000 ft to 10,000+ ft)

 

 

Nonoperating

–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)

 

 

12

Momentus XT Product Manual, Rev. B

Image 18
Contents Momentus XT ST95005620AS ST93205620AS ST92505610ASRevision history Revision Date Sheets affected or commentsContents Momentus XT Product Manual, Rev. B List of Figures Page Introduction Standard modelsAbout the Serial ATA interface Drive specifications Specification summary tableYes requires Comreset from host after a hotplug event Solid State Hybrid feature Default logical geometryLBA mode Specifics of the Solid State Hybrid FeaturePhysical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeStart/stop times Typical seek times ms ReadPower specifications Typical current profile Typical +5V only startup and operation current profileConducted noise Voltage toleranceActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Acoustics Test for Prominent Discrete Tones PDTs Electromagnetic immunityReliability Radio frequency environmentsAgency certification Page Environmental protection European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Corrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands ATA-standard commands names Command code in hexATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Set Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Warranty Support Direct.seagate.com Spp.seagate.comWeb Data Recovery Services Call Center Toll-free Direct dial Technical Support Warranty ServiceData Recovery Services Authorized Service Centers Presales SupportIndex ITE TPI Momentus XT Product Manual, Rev. B Page Seagate Technology LLC