Seagate ST1000LM014, ST93205620AS, ST92505610AS manual Agency certification

Page 21

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 60950-1 and CSA C22.2 (950) and meet all applicable sec- tions of IEC 60950-1 and EN60950-1 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean BCC

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Broadcasting Communications Center (BCC) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•Certificate number: STX-MomentusXT (B)

•Trade name or applicant: Seagate Technology LLC

•Date of certificate: March 12, 2010

•Manufacturer/nationality: USA and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.14.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

Momentus XT Product Manual, Rev. B

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ST95005620AS ST93205620AS ST92505610AS Momentus XTRevision Date Sheets affected or comments Revision historyContents Momentus XT Product Manual, Rev. B List of Figures Page Standard models IntroductionAbout the Serial ATA interface Specification summary table Drive specificationsYes requires Comreset from host after a hotplug event LBA mode Default logical geometrySolid State Hybrid feature Specifics of the Solid State Hybrid FeatureDrive specification Physical characteristicsPhysical organization Recording and interface technologyStart/stop times Seek timeTypical seek times Typical seek times ms ReadPower specifications Typical +5V only startup and operation current profile Typical current profileVoltage tolerance Conducted noisePower management modes Power-management modesActive mode Idle modeEnvironmental specifications Acoustics Reliability Electromagnetic immunityTest for Prominent Discrete Tones PDTs Radio frequency environmentsAgency certification Page Environmental protection European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Corrosive environment Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewHot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionATA-standard commands names Command code in hex Supported ATA commandsATA-standard security commands Word Description Value Identify Device commandXx07H Description if bit is set to Bit Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Warranty Support Direct.seagate.com Spp.seagate.comWeb Data Recovery Services Authorized Service Centers Technical Support Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Presales SupportIndex ITE TPI Momentus XT Product Manual, Rev. B Page Seagate Technology LLC
Top Page Image Contents