Seagate ST93205620AS, ST1000LM014, ST92505610AS manual Description if bit is set to Bit

Page 34

Word	Description	Value

100–103	Total number of user-addressable LBA sectors	ST95005620AS	= 976,773,168
	available (see Section 2.2 for related information)	ST93205620AS	= 625,142,448
	These words are required for drives that support	ST92505610AS	= 488,397,168
	the 48-bit addressing feature.
	Maximum value: 0000FFFFFFFFFFFFh.

104–118	ATA-reserved	0000H
119	Free Fall Protection support (bit 5)	1 = Free Fall Protection supported
		0 = Free Fall Protection not supported

120	Free Fall Protection enable/disable (bit 5)	1 = Free Fall Protection feature is enabled
		0 = Free Fall Protection feature is disabled

121–127	ATA-reserved	0000H
128	Security status	0001H
129–159	Seagate-reserved	xxxxH
160–254	ATA-reserved	0000H
255	Integrity word	xxA5H

Note. See the bit descriptions below for words 63, 88, 93 and 94 of the Identify Drive data:

Description (if bit is set to 1)

Bit

Word 63

0Multiword DMA mode 0 is supported.

1Multiword DMA mode 1 is supported.

2Multiword DMA mode 2 is supported.

8Multiword DMA mode 0 is currently active.

9Multiword DMA mode 1 is currently active.

10Multiword DMA mode 2 is currently active.

Bit

Word 88

0Ultra DMA mode 0 is supported.

1Ultra DMA mode 1 is supported.

2Ultra DMA mode 2 is supported.

3Ultra DMA mode 3 is supported.

4Ultra DMA mode 4 is supported.

5Ultra DMA mode 5 is supported

6Ultra DMA mode 6 is supported

8Ultra DMA mode 0 is currently active.

9Ultra DMA mode 1 is currently active.

10Ultra DMA mode 2 is currently active.

11Ultra DMA mode 3 is currently active.

12Ultra DMA mode 4 is currently active.

13Ultra DMA mode 5 is currently active.

14Ultra DMA mode 6 is currently active.

28	Momentus XT Product Manual, Rev. B

Image 34

Contents Momentus XT ST95005620AS ST93205620AS ST92505610ASRevision history Revision Date Sheets affected or commentsContents Momentus XT Product Manual, Rev. B List of Figures Page Introduction Standard modelsAbout the Serial ATA interface Drive specifications Specification summary tableYes requires Comreset from host after a hotplug event Solid State Hybrid feature Default logical geometryLBA mode Specifics of the Solid State Hybrid FeaturePhysical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeStart/stop times Typical seek times ms ReadPower specifications Typical current profile Typical +5V only startup and operation current profileConducted noise Voltage toleranceActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Acoustics Test for Prominent Discrete Tones PDTs Electromagnetic immunityReliability Radio frequency environmentsAgency certification Page European Union Restriction of Hazardous Substances RoHS Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Corrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands ATA-standard commands names Command code in hexATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Set Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Warranty Support Direct.seagate.com Spp.seagate.com Seagate Technology support servicesWeb Data Recovery Services Call Center Toll-free Direct dial Technical Support Warranty ServiceData Recovery Services Authorized Service Centers Presales SupportIndex ITE TPI Momentus XT Product Manual, Rev. B Page Seagate Technology LLC