Seagate ST2000NM0063 manual Temperature a. Operating, Relative humidity, Shock and vibration

Page 37

6.5ENVIRONMENTAL LIMITS

Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 82°F (28°C).

6.5.1Temperature a. Operating

The drive meets the operating specifications over a 41°F to 140°F (5°C to 60°C) drive case temperature range with a maximum tem- perature gradient of 36°F (20°C) per hour.

The maximum allowable drive case temperature is 60°C. See Figure 10 for HDA case temperature measurement location.

The MTBF specification for the drive assumes the operating environment is designed to maintain nominal case temperature. The rated MTBF is based upon a sustained case temperature of 104°F (40°C). Occasional excursions in operating temperature between the rated MTBF temperature and the maximum drive operating case temperature may occur without impact to the rated MTBF. However, continual or sustained operation at case temperatures beyond the rated MTBF temperature will degrade the drive MTBF and reduce product reliability.

Air flow may be required to achieve consistent nominal case temperature values (see Section 10.2). To confirm that the required cool- ing is provided for the electronics and HDA, place the drive in its final mechanical configuration, and perform random write/read opera- tions. After the temperatures stabilize, measure the case temperature of the drive.

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

HDA Temp.

Check Point

Figure 10. Location of the HDA temperature check point

Note. Image is for reference only, may not represent actual drive.

6.5.2Relative humidity

The values below assume that no condensation on the drive occurs.

a.Operating

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

b.Non-operating

5% to 95% non-condensing relative humidity.

6.5.3Effective altitude (sea level) a. Operating

–200 to +10,000 feet (–61 to +3,048 meters) b. Non-operating

–200 to +40,000 feet (–61 to +12,210 meters)

6.5.4Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 11, and in accordance with the restrictions of Section 10.3.

CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G

31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Constellation ES.1 SAS Document Revision History Contents Installation Inquiry data 11.3.2 Mode Sense data Figures Seagate Technology Support Services Model Number Self-Encrypting Drive SED Fips 140-2 Level ScopeApplicable Standards and Reference Documentation Taiwanese Bsmi Korean KCCEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveSAS Interface Manual General Description Standard Features DDADF508 Read Write Average Single track Performance CharacteristicsFull stroke Maximum without verifyGeneral performance characteristics Prefetch operation Caching write dataRecoverable Errors Reliability SpecificationsUnrecoverable Errors Seek errorsHot plugging the drive Preventive maintenanceControlling S.M.A.R.T 4 S.M.A.R.TPerformance impact Reporting controlParameter Code Description Thermal monitorDrive Self Test DST DST failure definitionImplementation State of the drive prior to testingInvoking DST Short and extended testsAbort Product warrantyShipping StoragePHYSICAL/ELECTRICAL Specifications 0Gb mode Amps 2TB drive Standard & SED model DC power requirements1TB drive Standard & SED model DC power requirements 500GB drive Standard & SED model DC power requirements Conducted noise immunity Power sequencingCurrent profiles TB model current profiles GB model current profiles Power Dissipation Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Relative humidity Temperature a. OperatingEffective altitude sea level a. Operating Shock and vibrationShock Package size Packaged/product weight Drop heightVibration Air cleanlinessAcoustics Corrosive environmentMounting configuration dimensions Weight maximumValidation Program PurposeSeagate Enterprise SED Default password Admin SPAbout SELF-ENCRYPTING Drives Locking SPSanitize Cryptographic Erase Drive Internal DEFECTS/ERRORS Defect and Error ManagementRead and write retry count maximum recovery times Levels of PI Setting and determining the current Type LevelIdentifying a Protection Information drive Physical interface InstallationX = F 15lb = 67N Task management functions Interface RequirementsSAS task management functions supported Task management responsesCommand name Command code Supported Supported commandsSupported commands Supported commands Supported commands Inquiry data Mode Sense data Mode Pages Mode Sense data changeable and default values for 1TB drives Mode Pages Supported Feature or condition Miscellaneous featuresMiscellaneous status Supported StatusDatum B Section C C Section a a Connector requirements Physical characteristicsPin Signal name Signal type Electrical descriptionSAS transmitters and receivers PowerReady LED Out Ready LED Out conditionsDifferential signals LED drive signalGeneral interface characteristics Index Latency Index SAS Seagate Technology LLC

ST2000NM0063 specifications

The Seagate ST2000NM0063 is a high-performance internal hard disk drive designed for enterprise environments, offering a robust solution for those requiring reliable data storage. With a storage capacity of 2TB, this drive is ideal for both small and large enterprises, catering to applications ranging from data centers to surveillance systems.

One of the main features of the ST2000NM0063 is its 7200 RPM rotational speed, which ensures rapid data access and improved overall performance. This speed allows for faster read and write times, making it suitable for applications that demand quick data retrieval and processing. The drive supports a SATA 6Gb/s interface, which provides enhanced data transfer rates. This modern interface is essential for maximizing throughput, particularly when deployed in environments where speed is critical.

In terms of technology, the Seagate ST2000NM0063 utilizes Advanced Format Technology, enhancing data storage efficiency and increasing the number of user-addressable sectors. This feature allows for better alignment of data on the drive, which can lead to improved performance and reliability. Additionally, the drive incorporates the Seagate PowerChoice technology, enabling energy-efficient operations. This technology helps reduce power consumption during idle periods, contributing to lower operating costs and a smaller carbon footprint.

The ST2000NM0063 also emphasizes data integrity and reliability. Equipped with features such as error recovery control and vibration tolerance, this drive is designed to operate in challenging conditions. These attributes make it an excellent choice for RAID configurations and other enterprise applications that require high data availability and protection against data loss.

Furthermore, the ST2000NM0063 has a mean time between failures (MTBF) rating of 1.2 million hours, signifying its durability and long lifespan. This reliability is crucial for critical business applications where downtime is not an option.

In summary, the Seagate ST2000NM0063 combines high capacity, excellent performance, and advanced technologies to meet the demanding needs of enterprise storage. Its reliability, efficiency, and robust features make it a preferred choice for organizations looking to enhance their data storage solutions while ensuring optimal performance and longevity. Whether utilized in cloud storage, surveillance, or data center applications, this hard drive stands out as a dependable component in any IT infrastructure.
Top Page Image Contents