Seagate ST2000NM0063 manual Scope, Model Number Self-Encrypting Drive SED Fips 140-2 Level

Page 8

1.0SCOPE

This manual describes Seagate Technology® LLC, Constellation® ES.1 Series SAS (Serial Attached SCSI) disk drives.

Constellation ES.1 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive models.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements. If you are designing a system which will use one of the models listed or future generation products and need further assistance, please contact your Field Applications Engineer (FAE) or our global support services group as shown in “Seagate® Technology Support Services” on page 1.

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Model Number	Self-Encrypting Drive (SED)	FIPS 140-2 Level 2

ST2000NM0001	No	No

ST2000NM0021	Yes	No

ST2000NM0041	Yes	Yes

ST1000NM0001	No	No

ST1000NM0021	Yes	No

ST1000NM0041	Yes	Yes

ST500NM0001	No	No

ST500NM0021	Yes	No

ST500NM0041	Yes	Yes

Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a differ- entiation between drive-based encryption and other forms of encryption was necessary.

Note. The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).

For more information on FIPS 140-2 Level 2 certification see see Section 7.0 on page 35.

CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G

2

Image 8

Contents Constellation ES.1 SAS Document Revision History Contents Installation Inquiry data 11.3.2 Mode Sense data Figures Seagate Technology Support Services Scope Model Number Self-Encrypting Drive SED Fips 140-2 LevelApplicable Standards and Reference Documentation Korean KCC Taiwanese BsmiEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveSAS Interface Manual General Description Standard Features DDADF508 Performance Characteristics Read Write Average Single trackFull stroke Maximum without verifyGeneral performance characteristics Caching write data Prefetch operationReliability Specifications Recoverable ErrorsUnrecoverable Errors Seek errorsPreventive maintenance Hot plugging the drive4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlThermal monitor Parameter Code DescriptionDrive Self Test DST DST failure definitionState of the drive prior to testing ImplementationInvoking DST Short and extended testsProduct warranty AbortShipping StoragePHYSICAL/ELECTRICAL Specifications 2TB drive Standard & SED model DC power requirements 0Gb mode Amps1TB drive Standard & SED model DC power requirements 500GB drive Standard & SED model DC power requirements Current profiles Power sequencingConducted noise immunity TB model current profiles GB model current profiles Power Dissipation Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Temperature a. Operating Relative humidityEffective altitude sea level a. Operating Shock and vibrationPackage size Packaged/product weight Drop height ShockAir cleanliness VibrationAcoustics Corrosive environmentWeight maximum Mounting configuration dimensionsSeagate Enterprise SED PurposeValidation Program Admin SP Default passwordAbout SELF-ENCRYPTING Drives Locking SPSanitize Cryptographic Erase Defect and Error Management Drive Internal DEFECTS/ERRORSRead and write retry count maximum recovery times Identifying a Protection Information drive Setting and determining the current Type LevelLevels of PI Installation Physical interfaceX = F 15lb = 67N Interface Requirements Task management functionsSAS task management functions supported Task management responsesSupported commands Command name Command code SupportedSupported commands Supported commands Supported commands Inquiry data Mode Sense data Mode Pages Mode Sense data changeable and default values for 1TB drives Mode Pages Miscellaneous features Supported Feature or conditionMiscellaneous status Supported StatusDatum B Section C C Section a a Physical characteristics Connector requirementsPin Signal name Signal type Electrical descriptionPower SAS transmitters and receiversReady LED Out Ready LED Out conditionsGeneral interface characteristics LED drive signalDifferential signals Index Latency Index SAS Seagate Technology LLC