Seagate ST2000NM0063 manual Vibration, Acoustics, Air cleanliness, Corrosive environment

Page 39

6.5.4.2Vibration

a. Operating—normal

The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibra- tion not exceeding

5 - 22 Hz

0.25

Gs, limited displacement

22 - 350 Hz

0.5 Gs

350 - 500 Hz

0.25

Gs

Vibration may be applied in the X, Y, or Z axis.

b.Operating—abnormal

Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding: 15 minutes of duration at major resonant frequency

Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available. Operating abnormal translational random flat profile

5-500 Hz @ 0.75 G (X, Y, or Z axis)

c.Non-operating

The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding

5 - 22 Hz

2 Gs (0 to peak, linear, swept sine, 0.5 octave/min)

22 - 350 Hz

5 Gs (0 to peak, linear, swept sine, 0.5 octave/min)

350 - 500 Hz

2 Gs (0 to peak, linear, swept sine, 0.5 octave/min)

Vibration may be applied in the X, Y, or Z axis.

6.5.5Acoustics

Sound power during idle mode shall be 2.7 bels typical when measured to ISO 7779 specification. Sound power while operating shall be 3.0 bels typical when measured to ISO 7779 specification.

There will not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any drive.

6.5.6Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.

6.5.7Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate every potential application environment.

Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.

6.5.8Electromagnetic susceptibility

See Section 2.1.1.1.

CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G

33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Constellation ES.1 SAS Document Revision History Contents Installation Inquiry data 11.3.2 Mode Sense data Figures Seagate Technology Support Services Model Number Self-Encrypting Drive SED Fips 140-2 Level ScopeApplicable Standards and Reference Documentation China Restriction of Hazardous Substances RoHS Directive Korean KCCTaiwanese Bsmi European Union Restriction of Hazardous Substances RoHSSAS Interface Manual General Description Standard Features DDADF508 Maximum without verify Performance CharacteristicsRead Write Average Single track Full strokeGeneral performance characteristics Prefetch operation Caching write dataSeek errors Reliability SpecificationsRecoverable Errors Unrecoverable ErrorsHot plugging the drive Preventive maintenanceReporting control 4 S.M.A.R.TControlling S.M.A.R.T Performance impactDST failure definition Thermal monitorParameter Code Description Drive Self Test DSTShort and extended tests State of the drive prior to testingImplementation Invoking DSTStorage Product warrantyAbort ShippingPHYSICAL/ELECTRICAL Specifications 0Gb mode Amps 2TB drive Standard & SED model DC power requirements1TB drive Standard & SED model DC power requirements 500GB drive Standard & SED model DC power requirements Power sequencing Conducted noise immunityCurrent profiles TB model current profiles GB model current profiles Power Dissipation Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Constellation ES.1 SAS Product MANUAL, REV. G Shock and vibration Temperature a. OperatingRelative humidity Effective altitude sea level a. OperatingShock Package size Packaged/product weight Drop heightCorrosive environment Air cleanlinessVibration AcousticsMounting configuration dimensions Weight maximumPurpose Validation ProgramSeagate Enterprise SED Locking SP Admin SPDefault password About SELF-ENCRYPTING DrivesSanitize Cryptographic Erase Drive Internal DEFECTS/ERRORS Defect and Error ManagementRead and write retry count maximum recovery times Setting and determining the current Type Level Levels of PIIdentifying a Protection Information drive Physical interface InstallationX = F 15lb = 67N Task management responses Interface RequirementsTask management functions SAS task management functions supportedCommand name Command code Supported Supported commandsSupported commands Supported commands Supported commands Inquiry data Mode Sense data Mode Pages Mode Sense data changeable and default values for 1TB drives Mode Pages Supported Status Miscellaneous featuresSupported Feature or condition Miscellaneous statusDatum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin Signal name Signal typeReady LED Out conditions PowerSAS transmitters and receivers Ready LED OutLED drive signal Differential signalsGeneral interface characteristics Index Latency Index SAS Seagate Technology LLC

ST2000NM0063 specifications

The Seagate ST2000NM0063 is a high-performance internal hard disk drive designed for enterprise environments, offering a robust solution for those requiring reliable data storage. With a storage capacity of 2TB, this drive is ideal for both small and large enterprises, catering to applications ranging from data centers to surveillance systems.

One of the main features of the ST2000NM0063 is its 7200 RPM rotational speed, which ensures rapid data access and improved overall performance. This speed allows for faster read and write times, making it suitable for applications that demand quick data retrieval and processing. The drive supports a SATA 6Gb/s interface, which provides enhanced data transfer rates. This modern interface is essential for maximizing throughput, particularly when deployed in environments where speed is critical.

In terms of technology, the Seagate ST2000NM0063 utilizes Advanced Format Technology, enhancing data storage efficiency and increasing the number of user-addressable sectors. This feature allows for better alignment of data on the drive, which can lead to improved performance and reliability. Additionally, the drive incorporates the Seagate PowerChoice technology, enabling energy-efficient operations. This technology helps reduce power consumption during idle periods, contributing to lower operating costs and a smaller carbon footprint.

The ST2000NM0063 also emphasizes data integrity and reliability. Equipped with features such as error recovery control and vibration tolerance, this drive is designed to operate in challenging conditions. These attributes make it an excellent choice for RAID configurations and other enterprise applications that require high data availability and protection against data loss.

Furthermore, the ST2000NM0063 has a mean time between failures (MTBF) rating of 1.2 million hours, signifying its durability and long lifespan. This reliability is crucial for critical business applications where downtime is not an option.

In summary, the Seagate ST2000NM0063 combines high capacity, excellent performance, and advanced technologies to meet the demanding needs of enterprise storage. Its reliability, efficiency, and robust features make it a preferred choice for organizations looking to enhance their data storage solutions while ensuring optimal performance and longevity. Whether utilized in cloud storage, surveillance, or data center applications, this hard drive stands out as a dependable component in any IT infrastructure.
Top Page Image Contents