Seagate ST320LT014 - 9YK142 Acoustics, Electromagnetic immunity, Radio frequency environments

Page 20

3.11Acoustics

Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25°C). Emission levels are reported as the total A-weighted sound power levels for steady state, idle, and active seek modes of operation.

Table 5: Drive A-weighted Sound Power Levels (SWL, BA)

Idle*

Performance seek

 

 

2.3 bels (typ)

2.5 bels (typ)

2.5 bels (max)

2.7 bels (max)

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this pro- cess is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.

*Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

3.12Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 6:

Radio frequency environments

 

 

 

 

 

 

 

 

 

 

Performance

Reference

Test

 

Description

level

standard

 

 

 

 

Electrostatic discharge

Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV

B

EN 61000-4-2: 95

 

 

 

 

Radiated RF immunity

80 to 2000 MHz, 10 V/m,

A

EN 61000-4-3: 96

 

 

80% AM with 1 kHz sine

 

ENV 50204: 95

 

 

900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz

 

 

Electrical fast transient

± 1 kV on AC mains, ± 0.5 kV on external I/O

B

EN 61000-4-4: 95

 

 

 

 

Surge immunity

± 1 kV differential, ± 2 kV common, AC mains

B

EN 61000-4-5: 95

 

 

 

 

Conducted RF immunity

150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz

A

EN 61000-4-6: 97

 

 

sine

 

 

 

 

 

 

Power Frequency H-field

1 A/m, 50Hz/60Hz, 3 axes

A

EN 61000-4-8: 97

immunity

 

 

 

 

 

 

 

 

Voltage dips, interrupts

30% Reduction for 25 cycles

C

EN 61000-4-11: 94

 

 

>95% Reduction for 250 cycles

C

 

 

 

>95%, 0.5 cycles

B

 

 

 

 

 

 

14

Momentus Thin Product Manual, Rev. C Gen-2

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Momentus Thin ST model #Revision history Revision DateContents Momentus Thin Product Manual, Rev. C Gen-2 List of Figures Page Seagate Technology support services Seagate Online Support and ServicesIntroduction About the Serial ATA interface Drive specifications Specification summary tableWarranty information for your drive Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Recording and interface technologySeek time Typical seek timesPower specifications Start/stop timesMomentus Thin Product Manual, Rev. C Gen-2 Typical current profile Deferred spinupConducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationDrive A-weighted Sound Power Levels SWL, BA AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification ReliabilityAgency certification Electromagnetic compatibilityAustralian C-Tick N176 FCC verificationEnvironmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveConfiguring the drive Configuring and mounting the driveHandling and static-discharge precautions Top cover stiffness/deflection Serial ATA cables and connectorsDrive mounting Measurements shown in Figures 4 and 5 are in inches Momentus Thin Product Manual, Rev. C Gen-2 Level 2 security About FipsPurpose Momentus Thin Product Manual, Rev. C Gen-2 Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsATA-standard security commands Command name Command code in hexATA-standard power-management commands Identify Device command Word Description ValueXx7FH Description if bit is set to Bit Word Bit Word Set Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Momentus Thin Product Manual, Rev. C Gen-2 Index ITE TPI Momentus Thin Product Manual, Rev. C Gen-2 Page Seagate Technology LLC

ST250LT014 - 9YK14C, ST160LT011 - 9ZVG4D, ST320LT007 - 9ZV142, ST160LT014 - 9YK14D, ST160LT007 - 9ZV14D specifications

The Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 are part of Seagate’s esteemed line of mobile hard drives, known for their reliability and performance in various computing environments. These drives are particularly designed for use in laptops, external storage solutions, and other portable computing devices, delivering a balance of storage capacity, speed, and ruggedness.

The ST160LT014, for instance, provides a storage capacity of 160GB, making it suitable for users who require efficient and dependable storage for essential files while keeping weight and power consumption minimal. It measures 2.5 inches, making it an ideal fit for most laptop configurations. With a spindle speed of 5400 RPM, this model offers a good performance level for everyday tasks.

The ST320LT014 offers a larger capacity of 320GB. This model boasts not only the same 5400 RPM spindle speed but also utilizes SATA interface technology to ensure faster data transfer rates. This versatility allows for an improved user experience, especially for those working with larger files such as multimedia content.

With the ST320LT011, Seagate has upgraded the design, introducing an innovative error correction feature that enhances the drive’s reliability and data integrity. This model maintains the 320GB capacity while offering improved power management features, making it a more energy-efficient option compared to its predecessors.

On the other hand, the ST160LT007 advocates for a more compact and efficient solution with its 160GB storage size. This hard drive, like its counterparts, is engineered to operate under various conditions, ensuring that users can depend on its performance in both business and personal applications.

The ST250LT009 provides a middle ground with a 250GB capacity. This model is lauded for its balance between capacity and performance, and it is particularly favorable for users who require a reasonable amount of storage without compromising speed or energy efficiency.

All of these models incorporate advanced technologies such as Seagate's QuietStep technology, which minimizes noise and vibration during operation, providing a tranquil computing experience. Additionally, their designs often include adaptive power management features that help prolong battery life in laptops, making them suitable for mobile professionals on the go.

In conclusion, the Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 represent a range of options tailored to meet diverse storage needs while ensuring reliability, efficiency, and performance in portable computing.
Top Page Image Contents