Seagate ST320LT009 - 9WC142 Reliability, Agency certification, Safety certification, Korean RRL

Page 21

3.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max

Annualized Failure Rate (AFR)

<0.50%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

Warranty

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance

 

 

You will be asked to provide the drive serial number, model number (or part number)

 

 

and country of purchase. After submitting this information, the system will display the

 

 

warranty information for your drive.

3.14Agency certification

3.14.1Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

3.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

• Certificate number:

STX-MomentusThin (B)

• Trade name or applicant:

Seagate Technology LLC

•

Certificate date:

May 14, 2010

•

Manufacturer/nationality:

USA, Singapore and China

Momentus Thin Product Manual, Rev. C Gen-2

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ST model # Momentus ThinRevision Date Revision historyContents Momentus Thin Product Manual, Rev. C Gen-2 List of Figures Page Seagate Online Support and Services Seagate Technology support servicesIntroduction About the Serial ATA interface Specification summary table Drive specificationsWarranty information for your drive LBA mode Default logical geometryFormatted capacity Physical organizationRecording and interface technology Physical characteristicsSeek time Typical seek timesStart/stop times Power specificationsMomentus Thin Product Manual, Rev. C Gen-2 Deferred spinup Typical current profileConducted noise Voltage tolerancePower management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationAcoustics Drive A-weighted Sound Power Levels SWL, BAElectromagnetic immunity Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityFCC verification Australian C-Tick N176Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectors Drive mountingTop cover stiffness/deflection Measurements shown in Figures 4 and 5 are in inches Momentus Thin Product Manual, Rev. C Gen-2 About Fips PurposeLevel 2 security Momentus Thin Product Manual, Rev. C Gen-2 Signal Serial ATA connector pin definitionsSerial ATA Sata interface Segment Pin Function DefinitionP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex ATA-standard power-management commandsATA-standard security commands Word Description Value Identify Device commandXx7FH Description if bit is set to Bit Word Bit Word Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Momentus Thin Product Manual, Rev. C Gen-2 Index ITE TPI Momentus Thin Product Manual, Rev. C Gen-2 Page Seagate Technology LLC

ST250LT014 - 9YK14C, ST160LT011 - 9ZVG4D, ST320LT007 - 9ZV142, ST160LT014 - 9YK14D, ST160LT007 - 9ZV14D specifications

The Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 are part of Seagate’s esteemed line of mobile hard drives, known for their reliability and performance in various computing environments. These drives are particularly designed for use in laptops, external storage solutions, and other portable computing devices, delivering a balance of storage capacity, speed, and ruggedness.

The ST160LT014, for instance, provides a storage capacity of 160GB, making it suitable for users who require efficient and dependable storage for essential files while keeping weight and power consumption minimal. It measures 2.5 inches, making it an ideal fit for most laptop configurations. With a spindle speed of 5400 RPM, this model offers a good performance level for everyday tasks.

The ST320LT014 offers a larger capacity of 320GB. This model boasts not only the same 5400 RPM spindle speed but also utilizes SATA interface technology to ensure faster data transfer rates. This versatility allows for an improved user experience, especially for those working with larger files such as multimedia content.

With the ST320LT011, Seagate has upgraded the design, introducing an innovative error correction feature that enhances the drive’s reliability and data integrity. This model maintains the 320GB capacity while offering improved power management features, making it a more energy-efficient option compared to its predecessors.

On the other hand, the ST160LT007 advocates for a more compact and efficient solution with its 160GB storage size. This hard drive, like its counterparts, is engineered to operate under various conditions, ensuring that users can depend on its performance in both business and personal applications.

The ST250LT009 provides a middle ground with a 250GB capacity. This model is lauded for its balance between capacity and performance, and it is particularly favorable for users who require a reasonable amount of storage without compromising speed or energy efficiency.

All of these models incorporate advanced technologies such as Seagate's QuietStep technology, which minimizes noise and vibration during operation, providing a tranquil computing experience. Additionally, their designs often include adaptive power management features that help prolong battery life in laptops, making them suitable for mobile professionals on the go.

In conclusion, the Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 represent a range of options tailored to meet diverse storage needs while ensuring reliability, efficiency, and performance in portable computing.
Top Page Image Contents