Seagate ST160LT014 - 9YK14D manual 3 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 39

6.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-8 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 9:

S.M.A.R.T. commands

 

 

Code in features register

S.M.A.R.T. command

 

 

 

D0H

 

S.M.A.R.T. Read Data

D1H

 

Vendor-specific

D2H

 

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

 

S.M.A.R.T. Save Attribute Values

D4H

 

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

 

S.M.A.R.T. Read Log Sector

D6H

 

S.M.A.R.T. Write Log Sector

D7H

 

Vendor-specific

D8H

 

S.M.A.R.T. Enable Operations

D9H

 

S.M.A.R.T. Disable Operations

DAH

 

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

Momentus Thin Product Manual, Rev. C Gen-2

33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents ST model # Momentus ThinRevision Date Revision historyContents Momentus Thin Product Manual, Rev. C Gen-2 List of Figures Page Seagate Online Support and Services Seagate Technology support servicesIntroduction About the Serial ATA interface Specification summary table Drive specificationsWarranty information for your drive Physical organization Default logical geometryLBA mode Formatted capacityTypical seek times Physical characteristicsRecording and interface technology Seek timeStart/stop times Power specificationsMomentus Thin Product Manual, Rev. C Gen-2 Voltage tolerance Typical current profileDeferred spinup Conducted noiseIdle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockTest for Prominent Discrete Tones PDTs Drive A-weighted Sound Power Levels SWL, BAAcoustics Electromagnetic immunityElectromagnetic compatibility Safety certificationReliability Agency certificationFCC verification Australian C-Tick N176China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment European Union Restriction of Hazardous Substances RoHSConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectors Drive mountingTop cover stiffness/deflection Measurements shown in Figures 4 and 5 are in inches Momentus Thin Product Manual, Rev. C Gen-2 About Fips PurposeLevel 2 security Momentus Thin Product Manual, Rev. C Gen-2 Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex ATA-standard power-management commandsATA-standard security commands Word Description Value Identify Device commandXx7FH Description if bit is set to Bit Word Bit Word Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Momentus Thin Product Manual, Rev. C Gen-2 Index ITE TPI Momentus Thin Product Manual, Rev. C Gen-2 Page Seagate Technology LLC

ST250LT014 - 9YK14C, ST160LT011 - 9ZVG4D, ST320LT007 - 9ZV142, ST160LT014 - 9YK14D, ST160LT007 - 9ZV14D specifications

The Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 are part of Seagate’s esteemed line of mobile hard drives, known for their reliability and performance in various computing environments. These drives are particularly designed for use in laptops, external storage solutions, and other portable computing devices, delivering a balance of storage capacity, speed, and ruggedness.

The ST160LT014, for instance, provides a storage capacity of 160GB, making it suitable for users who require efficient and dependable storage for essential files while keeping weight and power consumption minimal. It measures 2.5 inches, making it an ideal fit for most laptop configurations. With a spindle speed of 5400 RPM, this model offers a good performance level for everyday tasks.

The ST320LT014 offers a larger capacity of 320GB. This model boasts not only the same 5400 RPM spindle speed but also utilizes SATA interface technology to ensure faster data transfer rates. This versatility allows for an improved user experience, especially for those working with larger files such as multimedia content.

With the ST320LT011, Seagate has upgraded the design, introducing an innovative error correction feature that enhances the drive’s reliability and data integrity. This model maintains the 320GB capacity while offering improved power management features, making it a more energy-efficient option compared to its predecessors.

On the other hand, the ST160LT007 advocates for a more compact and efficient solution with its 160GB storage size. This hard drive, like its counterparts, is engineered to operate under various conditions, ensuring that users can depend on its performance in both business and personal applications.

The ST250LT009 provides a middle ground with a 250GB capacity. This model is lauded for its balance between capacity and performance, and it is particularly favorable for users who require a reasonable amount of storage without compromising speed or energy efficiency.

All of these models incorporate advanced technologies such as Seagate's QuietStep technology, which minimizes noise and vibration during operation, providing a tranquil computing experience. Additionally, their designs often include adaptive power management features that help prolong battery life in laptops, making them suitable for mobile professionals on the go.

In conclusion, the Seagate ST160LT014, ST320LT014, ST320LT011, ST160LT007, and ST250LT009 represent a range of options tailored to meet diverse storage needs while ensuring reliability, efficiency, and performance in portable computing.
Top Page Image Contents