Seagate ST9320328CS, ST9500323CS manual Acoustics

Page 21

2.10.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mount- ing screws. Shock may be applied in the X, Y or Z axis.

2.10.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operat- ing shock of 350 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

2.10.5.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 1 msec duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 600 Gs based on a nonrepetitive half-sine shock pulse of 0.5 msec duration.

2.10.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.10.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.

5–500 Hz

1.0 Gs (0 to peak). Max displacement may apply below 10 Hz.

2.10.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5–500 Hz:

5.0 Gs (0 to peak). Max displacement may apply below 22 Hz.

2.11Acoustics

Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is con- ducted at room temperature (approximately 25°C). Emission levels are reported as the total A-weighted sound power levels for steady state, idle, and active seek modes of operation.

Table 5:

Drive A-weighted Sound Power Levels (SWL, BA)

 

 

 

 

ST9500323CS and ST9320328CS

ST9250311CS and ST91603110CS

 

 

 

 

 

Idle*

 

CE seek

Idle*

CE seek

 

 

 

 

 

Pipeline HD Mini Series SATA Product Manual, Rev. E

11

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ST9500323CSST9250311CS ST9320328CSST91603110CS Pipeline HD Mini Series SataRevision Date Sheets affected or comments Revision historyPipeline HD Mini Series Sata Product Manual, Rev. E Pipeline HD Mini Series Sata Product Manual, Rev. E Contents Pipeline HD Mini Series Sata Product Manual, Rev. E List of Figures Page Seagate Technology Support Services Viii About the Serial ATA interface IntroductionPage Specification summary table Drive specificationsSleep mode LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsRecording and interface technology Seek timeStart/stop times Power specifications Typical current profile DC powerPower management modes Power-management modesActive mode Idle modeEnvironmental specifications Acoustics Test for Prominent Discrete Tones PDTs Electromagnetic immunityRadio frequency environments Performance Reference Test Description Level StandardReliability Safety certificationAgency certification Annualized Failure Rate AFRKorean RRL Environmental protectionAustralian C-Tick N176 FCC verificationCorrosive environment European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Pipeline HD Mini Series Sata Product Manual, Rev. E Handling and static-discharge precautions Configuring and mounting the driveConfiguring the drive Serial ATA cables and connectorsTop cover stiffness/deflection Drive mountingMeasurements shown in are in inches Pipeline HD Mini Series Sata Product Manual, Rev. E Signal Serial ATA connector pin definitionsSerial ATA Sata interface Segment Pin Function DefinitionSupported ATA commands PowerCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard security commands ATA-standard power-management commandsWord Description Value Identify Device commandXxxxH Bit Word Description if bit is set to Bit WordSet Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Pipeline HD Mini Series Sata Product Manual, Rev. E Index ITE TPI Pipeline HD Mini Series Sata Product Manual, Rev. E Page Seagate Technology LLC
Top Page Image Contents