Seagate ST94811AB manual Introduction, Momentus disc drive

Page 7

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the Seagate® Momentus™ Blade Server drive:

• ST94811AB

These drives provide the following key features:

•5,400-RPM spindle speed and 8 Mbytes combine for superior performance.

•Quiet operation. Fluid Dynamic Bearing (FDB) motor.

•High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

•Tunneling Magnetoresistive (TMR) recording heads.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Full-track multiple-sector transfer capability without local processor intervention.

•800 Gs nonoperating shock and 225 Gs operating shock.

•SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•The 3D Defense System™, which includes Drive Defense, Data Defense, and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Support for Read Multiple and Write Multiple commands.

•Support for autodetection of master/slave drives that use cable select (CSEL).

Figure 1. Momentus disc drive

Momentus Blade Server Product Manual, Rev. B

1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ST94811AB Momentus Blade ServerPage Contents Momentus Blade Server Product Manual, Rev. B List of Figures Momentus Blade Server Product Manual, Rev. B Momentus disc drive IntroductionMomentus Blade Server Product Manual, Rev. B Drive specification ST94811AB Drive specificationsSpecification summary SpecificationsSpecifications Physical organization Default logical geometryLBA mode Formatted capacityTypical seek times msec Read Write Physical characteristicsSeek time Time to readyPower specifications Conducted noise Typical current profileVoltage tolerance Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification Momentus Blade Server Product Manual, Rev. B Master/slave configuration Configuring and mounting the driveHandling and static discharge precautions Jumper settingsCable-select option Drive mountingCable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandSupported S.M.A.R.T. commands 4 S.M.A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage TMR Momentus Blade Server Product Manual, Rev. B Page Seagate Technology LLC

ST94811AB specifications

The Seagate ST94811AB is a highly regarded hard disk drive that has made its mark in the world of data storage solutions. With a capacity of 80 GB, this drive was designed to meet the growing demands for reliable and efficient data storage in both personal and professional settings.

One of the main features of the ST94811AB is its 2.5-inch form factor, which makes it ideal for use in laptops, portable devices, and compact desktop systems. This size allows for easy integration into various applications while maintaining a balance between portability and performance. The drive operates at 5400 RPM, providing a solid performance level that is adequate for a wide range of tasks, including data backup, file storage, and even light gaming.

In terms of connectivity, the Seagate ST94811AB utilizes the SATA interface, which is standard for modern hard drives. This interface supports high-speed data transfer rates, ensuring efficient and quick access to stored files. The SATA connection enhances the overall responsiveness of the drive, making it a suitable choice for users who prioritize speed and reliability.

When it comes to durability, this drive was built with robustness in mind. The ST94811AB features Seagate's proprietary technologies that aim to extend the lifespan of the drive while providing protection against data loss. This includes advanced error correction mechanisms and shock resistance, which are crucial for maintaining data integrity, especially in portable devices that may be subjected to bumps and vibrations.

Another significant characteristic of the ST94811AB is its low power consumption. This feature is particularly beneficial for laptop users, as it contributes to longer battery life without sacrificing performance. The drive's efficient design helps to reduce heat generation, which in turn enhances the longevity of both the drive and the device it's installed in.

Overall, the Seagate ST94811AB stands out as a reliable and efficient hard drive solution. Its blend of performance, durability, and energy efficiency makes it a sought-after choice among users looking for dependable data storage. Whether for everyday use or specific applications that require compact form factors, the ST94811AB delivers a balanced performance suitable for various data management needs.
Top Page Image Contents