APPENDIXPENDIX
TROUBLESHOOTING
Abnormal Operation
| Check to see if there is any object between the product and the remote | |
| control causing obstruction. Ensure you are pointing the remote control | |
The remote control | directly at the TV. |
|
|
| |
doesn’t work | Ensure that the batteries are installed with correct polarity (+ to +, - to | |
| Ensure that the correct remote operating mode is set: TV, VCR etc. | |
| Install new batteries. | *This feature is not available for all models. |
TV turns off suddenly
Video Problems
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes. *This feature is not available for all models.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
No picture &No sound
Is the power cord inserted into wall power outlet?
Picture appears slowly
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.
This is normal, the image is muted during the product startup process.
after switching on
Please contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
No or poor color or
poor picture
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks in pic-
tures
No picture when con-
necting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Check antenna (Change the direction of the antenna).
If an HDMI cable doesn’t support High Speed HDMI, it can cause flick- ers or no screen display. In this case use the latest cables that support High Speed HDMI.
26
Downloaded From
