PREPARATION
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C, 42/47/55LE530C)
ᯫImage shown may differ from your TV.
INSTALLATION
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Assemble the parts of the STAND BODY with the STAND BASE of the TV. At this time, tighten the screws that hold the STAND BODY on.
STAND BODY 
STAND BASE
M4 x 20 | M4 x 22 | (32LE5300) |
|
| |
26LE5300, | M4 x 24 (37/42LE5300, 42LE530C) | |
26LE5500 | M4 x 26 | (47/55LE5300, 47/55LE530C) |
3Assemble the TV as shown.
4Assemble the part of the STAND REAR COVER with the TV.
STAND REAR |
COVER |
5Install the 4 screws into the holes shown.
or
(For 42/47/55LE530C)
Tighten the two of these four
x 2 
x 2 screws and the two Torx plus
star head screws (provided as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).
M4 x 14 | M4 x 16 |
26LE5300, Other models
1026LE5500
DETACHMENT
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Remove the screws that hold the stand on.
3Detach the STAND REAR COVER from TV.
4Detach the stand from TV.
!NOTE
When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.
Downloaded From
