Installing the System-Fan Assembly
1. Tighten the grommets that secure the system fan to the system-fan module.
2. Connect the system-fan cable to the system-fan module.
3. Install the screws that secure the system-fan module to the chassis.
4. Route the system-fan cables out of the opening in the system-fan module in the direction of the
system board.
5. Connect the system-fan and internal speaker cables to their connectors on the system board.
6. Slide the memory shroud retention modules downwards into the retention tabs until they are
secured to the system-fan module.
7. Install the screws that secure the optical-drive bracket to the chassis.
8. Install:
a. memory shroud
b. PCIe card retention
c. optical drive
d. left cover
9. Follow the procedures in After Working Inside Your Computer.
Removing the Front Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the left cover.
3. Pry the front bezel retention clips away from the chassis located at the edge of front bezel.
38