Installing the Left Cover
1. Place the computer cover on the chassis.
2. Press down on the cover till it clicks into place.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Intrusion Switch
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. left cover
b. memory shroud
3. Perform the following steps as shown in the illustration:
a. Press the intrusion switch release latch and disconnect the connector from the system board
[1,2].
b. Unroute the intrusion switch cable from the chassis [3].
c. Push the intrusion switch downwards and remove it from the computer [4].
18