Option Description
Tower 7910 • SATA–0
• SATA–1
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID controller
card, the hard drives will display {none} in all the fields. The
hard drives can be seen in the RAID controller card BIOS.
SMART Reporting This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.
•Enable SMART Reporting - This option is disabled by default.
USB Configuration Allows you to enable or disable the internal USB configuration.
The options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable internal USB ports
• Enable rear USB Ports
SAS RAID Controller (Tower 7910
only)
Allows you to control the operation
of the integrated SAS RAID HDD
controller.
•Enabled (Default)
• Disabled.
HDD Fans Allows you to control the HDD fans.
Default Setting: depends on the system configuration
Audio Allows you enable or disable the audio feature.
•Enable Audio (Default)
Memory Map IO above 4GB Allows you enable or disable Memory
Map IO above 4GB.
•Memory Map IO above 4GB - This
option is disabled by default.
Thunderbolt Allows you to enable or disable Thunderbolt device support
capability.
• Enabled
•Disabled (Default)
Miscellaneous devices Allows you to enable or disable
various on board devices.
• Enable PCI Slot
PCI MMIO Space Size This field controls the balance of 32-
bit memory available between PCI
63