5. Remove the screws from the optical drive and remove the bracket.
Installing the 5.25-inch Optical Drive
NOTE: If the sytem is not shipped with optical drive, remove the 5.25-inch optical drive cover from
the front cover to install the Optical drive.
1. Place the optical drive on the bracket and tighten the screws to secure the optical drive.
2. Slide the optical drive into the drive bay.
3. Connect the power and data cables to the optical drive.
4. Install:
a. right cover
5. Follow the procedures in After Working Inside Your Computer.
Removing the HDD Thermal Sensor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. left cover
b. right cover
3. Perform the following steps:
a. Disconnect the HDD thermal-sensor cable from the system board [1].
b. Unroute the HDD thermal-sensor cable through the chassis opening [2].
47