Installing the HDD Thermal Sensor
1. Install the HDD thermal-sensor cable on the system board.
2. Route the HDD thermal-sensor cable around the computer chassis.
3. Fasten the latch that secures the HDD thermal-sensor cable.
4. Install:
a. right cover
b. left cover
5. Follow the procedures in After Working Inside Your Computer.
Removing the Processor
1. Follow the procedures inBefore Working Inside Your Computer.
2. Remove:
a. left cover
b. heatsink
3. To remove the processor:
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever
needs to be opened first and which lever closes first.
a. Press down on the first lever holding the processor cover in place and release it sideways from its
retention hook [1].
b. Repeat step 'a' to release the second lever from its retention hook [2].
c. Lift up the lever from its retention hook [3].
d. Press down on the first lever [4].
e. Lift up and remove the processor cover [5].
f. Lift the processor to remove it from the socket and place it in antistatic package [6].
49