Option Description
• Last Power State
Auto On Time Allows you to set the time at which the computer must turn on automatically.
The options are:
•Disabled (Default)
• Every Day
• Weekdays
• Select Days
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
•Disabled (Default)
• Enabled in S5 only
• Enabled in S4 and S5
Fan Speed Control Allows you to control the speed of the system fan. The options are:
•Auto (Default)
• Medium low
• Medium high
• Medium
• High
• Low
USB Wake Support Allows you to enable USB devices to wake the system from standby.
•Enable USB Wake Support
Default Setting: The option is disabled.
Wake on LAN This option allows the computer to power up from the off state when triggered
by a special LAN signal. Wake-up from the Standby state is unaffected by this
setting and must be enabled in the operating system. This feature only works
when the computer is connected to AC power supply.
•Disabled - Does not allow the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN.
•LAN Only - Allows the system to be powered on by special LAN signals.
•LAN with PXE Boot - Allows the system to power on and immediately boot
to PXE when it receives a wake-up packet sent to the system in either the S4
or S5 state.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS Environment.
Default Setting: Disabled
Table 9. POST Behavior
Option Description
Numlock LED Specifies if the NumLock function can be enabled when the system boots. This
option is enabled by default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This
option is enabled by default.
67