Seagate ST3750330AS, ST31000340AS, ST31000640AS, ST3750630AS manual Set Features command values

Page 37

4.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 8: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

 

46H

Ultra DMA mode 6

10H

Enable use of SATA features

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

90H

Disable use of SATA features

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

Barracuda 7200.11 Serial ATA Product Manual, Rev. C

31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Barracuda 7200.11 Serial ATA Revision Date Sheets affected or comments Revision historyContents Barracuda 7200.11 Serial ATA Product Manual, Rev. C Typical 5V startup and operation current profile List of FiguresPage Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C Drive specifications summary for 500 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C LBA mode Default logical geometryFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Typical seek times msec Read WritePower specifications Typical 12V startup and operation current profile Typical 5V startup and operation current profileActive mode Power-management modesIdle mode Sleep modeEnvironmental specifications Operating vibration VibrationNonoperating vibration 1000 GB, 750 GB and 500 GB modelsElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment超出 Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensionsBarracuda 7200.11 Serial ATA Product Manual, Rev. C Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Command name Command code in hex Write Sectors Extended 34H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page Sata Barracuda 7200.11 Serial ATA Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 48 pages 57.3 Kb

ST3500820AS, ST3500320AS, ST3500620AS, ST31000640AS, ST31000340AS specifications

Seagate has long been a prominent player in the hard drive industry, and its line of SATA drives, including the ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS, showcases a blend of performance, reliability, and advanced technology. These drives cater to various user needs, from consumer desktops to enterprise applications.

The ST3640330AS and ST3750330AS models are designed with a 7200 RPM spinning speed, ensuring fast data throughput for gaming, multimedia, and everyday computing tasks. With a SATA interface and compatibility with the latest systems, these drives are ideal for users seeking efficient storage solutions. The ST3640330AS provides 640 GB of storage, while the ST3750330AS boasts a generous 750 GB capacity, offering ample space for large files and applications.

Moving to the ST3750630AS, this model continues the trend of high performance, offering 750 GB of storage but enhanced with Seagate’s advanced error-correcting technology. It also features an updated cache architecture that optimizes read and write speeds while minimizing latency. This drive is particularly beneficial for users who require reliable backups and quick access to data.

The ST31000340AS and ST31000640AS are both part of Seagate’s 1 TB series and are engineered for durability and longevity. The ST31000340AS features traditional SATA technology, providing users with a balance between cost and performance. On the other hand, the ST31000640AS integrates improved power management features that result in lower energy consumption without compromising performance. This makes it a suitable choice for environmentally-conscious consumers or businesses looking to reduce operational costs.

All models feature Seagate's proprietary technologies such as SoftSonic drives, which result in quieter operation, and advanced power management capabilities that extend the lifespan of the hard drives. They are equipped with robust error recovery and data security features, ensuring data integrity and protecting against data loss.

Overall, the Seagate ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS drives represent a comprehensive range of storage solutions that combine capacity, speed, and cost-effectiveness, making them a popular choice for a variety of users, from casual consumers to demanding enterprise environments.
Top Page Image Contents