Seagate ST3750630AS, ST31000340AS 3 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 38

4.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-5 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 9:

S.M.A.R.T. commands

 

 

Code in features register

S.M.A.R.T. command

 

 

 

D0H

 

S.M.A.R.T. Read Data

D2H

 

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

 

S.M.A.R.T. Save Attribute Values

D4H

 

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

 

S.M.A.R.T. Read Log Sector

D6H

 

S.M.A.R.T. Write Log Sector

D8H

 

S.M.A.R.T. Enable Operations

D9H

 

S.M.A.R.T. Disable Operations

DAH

 

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

32

Barracuda 7200.11 Serial ATA Product Manual, Rev. C

Image 38
Contents Barracuda 7200.11 Serial ATA Revision history Revision Date Sheets affected or commentsContents Barracuda 7200.11 Serial ATA Product Manual, Rev. C List of Figures Typical 5V startup and operation current profilePage Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C Drive specifications summary for 500 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C Formatted capacity Default logical geometryLBA mode Recording and interface technologyStart/stop times Physical characteristicsSeek time Typical seek times msec Read WritePower specifications Typical 5V startup and operation current profile Typical 12V startup and operation current profileIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating vibration VibrationOperating vibration 1000 GB, 750 GB and 500 GB modelsFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsAgency certification Safety certificationReliability Electromagnetic compatibilityFCC verification Korean RRLAustralian C-Tick N176 Environmental protection Corrosive environment超出Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingBarracuda 7200.11 Serial ATA Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F3H Command name Command code in hex Write Sectors Extended 34H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page Sata Barracuda 7200.11 Serial ATA Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 48 pages 57.3 Kb

ST3500820AS, ST3500320AS, ST3500620AS, ST31000640AS, ST31000340AS specifications

Seagate has long been a prominent player in the hard drive industry, and its line of SATA drives, including the ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS, showcases a blend of performance, reliability, and advanced technology. These drives cater to various user needs, from consumer desktops to enterprise applications.

The ST3640330AS and ST3750330AS models are designed with a 7200 RPM spinning speed, ensuring fast data throughput for gaming, multimedia, and everyday computing tasks. With a SATA interface and compatibility with the latest systems, these drives are ideal for users seeking efficient storage solutions. The ST3640330AS provides 640 GB of storage, while the ST3750330AS boasts a generous 750 GB capacity, offering ample space for large files and applications.

Moving to the ST3750630AS, this model continues the trend of high performance, offering 750 GB of storage but enhanced with Seagate’s advanced error-correcting technology. It also features an updated cache architecture that optimizes read and write speeds while minimizing latency. This drive is particularly beneficial for users who require reliable backups and quick access to data.

The ST31000340AS and ST31000640AS are both part of Seagate’s 1 TB series and are engineered for durability and longevity. The ST31000340AS features traditional SATA technology, providing users with a balance between cost and performance. On the other hand, the ST31000640AS integrates improved power management features that result in lower energy consumption without compromising performance. This makes it a suitable choice for environmentally-conscious consumers or businesses looking to reduce operational costs.

All models feature Seagate's proprietary technologies such as SoftSonic drives, which result in quieter operation, and advanced power management capabilities that extend the lifespan of the hard drives. They are equipped with robust error recovery and data security features, ensuring data integrity and protecting against data loss.

Overall, the Seagate ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS drives represent a comprehensive range of storage solutions that combine capacity, speed, and cost-effectiveness, making them a popular choice for a variety of users, from casual consumers to demanding enterprise environments.