Seagate ST3750330SV, ST31000340SV, ST3250310SV, ST3500320SV manual Revision history, Revision Date

Page 2

		Revision history
Revision	Date	Sheets affected or comments
Rev. A	10/29/07	Initial release.
Rev. B	02/13/08	4, 6-7, 9-10, 12 and 14.

Copyright © 2007-2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A.

Publication number: 100480760, Rev. B February 2008

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SV35.3 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.

When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measure- ment and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2

Contents SV35.3 Series Serial ATA ST31000340SV ST3750330SV ST3500320SV ST3250310SVRevision history Revision DateContents SV35.3 Series Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specification ST31000340SV ST3750330SV ST3500320SV System will display the warranty information for your drive Drive specifications summary for 250 Gbyte models Drive specification ST3250310SVTem will display the warranty information for your drive Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per trackRecording and interface technology Physical characteristicsDrive specification Models ST31000340SV, ST3750330SV & ST3500320SV ST3250310SVTypical seek times msec Read Write Seek timeStart/stop times TB models GB modelsPower specifications DC power requirements Conducted noise Voltage toleranceIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating shock 4, 3 and 2 disc models ShockOperating shock Nonoperating shock 1 disc modelsFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Radio frequency environmentsReliability Agency certification Environmental protection China Restriction of Hazardous Substances RoHS DirectiveCorrosive environment SV35.3 Series Serial ATA Product Manual, Rev. B Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSV35.3 Series Serial ATA Product Manual, Rev. B Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions PowerPage Command name Command code in hex Supported ATA commandsSupported ATA commands F6H E8H Identify Device command Word Description ValueXxxxH Xx3FH Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesF1 H Code in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands SV35.3 Series Serial ATA Product Manual, Rev. B Technical Support InternetPresales Support Data Recovery Services Call Center Toll-free Direct dialFAX Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page SV35.3 Series Serial ATA Product Manual, Rev. B Page Seagate Technology LLC