Seagate ST3250310SV, ST31000340SV, ST3750330SV, ST3500320SV manual Agency certification

Page 25

2.13Agency certification

2.13.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950.

2.13.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•Family name: SV35.3 Series

•Certificate number: STX-ST31000340AS (B)

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.13.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursu- ant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interfer- ence to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

• Reorient the receiving antenna.

SV35.3 Series Serial ATA Product Manual, Rev. B

19

Page 24 Page 26
Image 25
Page 24 Page 26
Contents ST31000340SV ST3750330SV ST3500320SV ST3250310SV SV35.3 Series Serial ATARevision Date Revision historyContents SV35.3 Series Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST31000340SV ST3750330SV ST3500320SV System will display the warranty information for your drive Drive specification ST3250310SV Drive specifications summary for 250 Gbyte modelsTem will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per trackDrive specification Physical characteristicsRecording and interface technology Models ST31000340SV, ST3750330SV & ST3500320SV ST3250310SVStart/stop times Seek timeTypical seek times msec Read Write TB models GB modelsPower specifications DC power requirements Voltage tolerance Conducted noiseActive mode Power-management modesIdle mode Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock 4, 3 and 2 disc models Nonoperating shock 1 disc modelsElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Radio frequency environmentsReliability Agency certification China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment SV35.3 Series Serial ATA Product Manual, Rev. B Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewSV35.3 Series Serial ATA Product Manual, Rev. B Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal PowerPage Supported ATA commands Supported ATA commandsCommand name Command code in hex F6H E8H Word Description Value Identify Device commandXxxxH Xx3FH Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandF1 H A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command SV35.3 Series Serial ATA Product Manual, Rev. B Presales Support InternetTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dialFAX Index ITE Page SV35.3 Series Serial ATA Product Manual, Rev. B Page Seagate Technology LLC
Top Page Image Contents