Seagate ST3120211AS, ST3120811AS, ST3160211AS, ST3160811AS, ST380211AS Environmental specifications

Page 22

2.9Environmental specifications

2.9.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions for standard models, or 64°C (147°F) within the operating ambient conditions for all models.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters).

Operating:	0° to 60°C (32° to 140°F)

Nonoperating:	–40° to 70°C (–40° to 158°F)

2.9.2Temperature gradient

Operating:	20°C per hour (68°F per hour max), without condensation

Nonoperating:	30°C per hour (86°F per hour max)

2.9.3Humidity

2.9.3.1Relative humidity

Operating:	5% to 90% noncondensing (30% per hour max)

Nonoperating:	5% to 95% noncondensing (30% per hour max)

2.9.3.2Wet bulb temperature

Operating:	37.7°C	(99.9°F max)

Nonoperating:	40.0°C	(104°F max)

2.9.4Altitude

Operating:	–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

Nonoperating:	–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

2.9.5.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs (except 500GB is 300 Gs) based on a nonre- petitive half-sine shock pulse of 2 msec duration.

16	Barracuda 7200.9 Serial ATA Product Manual, Rev. C

Image 22

Contents Barracuda 7200.9 Serial ATA Page Contents Barracuda 7200.9 Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 160 Gbyte models Drive specification ST3160811AS ST3160211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Drive specifications summary for 120 Gbyte models Drive specification ST3120811AS ST3120211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Drive specifications summary for 80 and 40 Gbyte models Drive specification ST380811AS ST380211AS ST340211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologyStart/stop times Seek timeTypical seek times msec Read Write Power specifications Conducted noise Typical current profilesVoltage tolerance Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Operating vibration AcousticsVibration Nonoperating vibrationRadio frequency environments Electromagnetic immunityReliability Test Description Performance level Reference standardElectromagnetic compatibility Safety certificationAgency certification Korean RRLFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment Barracuda 7200.9 Serial ATA Product Manual, Rev. C Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingBarracuda 7200.9 Serial ATA Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Barracuda 7200.9 Serial ATA Product Manual, Rev. C Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Sata Barracuda 7200.9 Serial ATA Product Manual, Rev. C Page Seagate Technology LLC