Seagate ST340211AS Serial ATA device plug connector pin definitions, Pin Function Definition

Page 34

4.2Serial ATA device plug connector pin definitions

Table 7 summarizes the signals on the Serial ATA interface and power connectors..

Table 7:	Serial ATA connector pin definitions

Segment	Pin	Function	Definition

	S1	Ground	2nd mate

	S2	A+	Differential signal pair A from Phy

	S3	A-

	S4	Ground	2nd mate

	S5	B-	Differential signal pair B from Phy

	S6	B+
Signal
Signal	S7	Ground	2nd mate

		Key and spacing separate signal and power segments

	P1	V33	3.3V power
	P2	V33	3.3V power
	P3	V33	3.3V power, pre-charge, 2nd mate
	P4	Ground	1st mate

	P5	Ground	2nd mate

	P6	Ground	2nd mate

	P7	V5	5V power, pre-charge, 2nd mate

Power	P8	V5	5V power

	P9	V5	5V power

	P10	Ground	2nd mate

	P11	Ground or LED signal	If grounded, drive does not use deferred spin

	P12	Ground	1st mate.

	P13	V12	12V power, pre-charge, 2nd mate
	P14	V12	12V power
	P15	V12	12V power

Notes:

1.All pins are in a single row, with a 1.27 mm (0.050”) pitch.

2.The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are:

•the ground pins P4 and P12.

•the pre-charge power pins and the other ground pins.

•the signal pins and the rest of the power pins.

3.There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration.

4.All used voltage pins (Vx) must be terminated.

28	Barracuda 7200.9 Serial ATA Product Manual, Rev. C

Image 34

Contents Barracuda 7200.9 Serial ATA Page Contents Barracuda 7200.9 Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 160 Gbyte models Drive specification ST3160811AS ST3160211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Drive specifications summary for 120 Gbyte models Drive specification ST3120811AS ST3120211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Drive specifications summary for 80 and 40 Gbyte models Drive specification ST380811AS ST380211AS ST340211ASBarracuda 7200.9 Serial ATA Product Manual, Rev. C Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologyStart/stop times Seek timeTypical seek times msec Read Write Power specifications Conducted noise Typical current profilesVoltage tolerance Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Operating vibration AcousticsVibration Nonoperating vibrationRadio frequency environments Electromagnetic immunityReliability Test Description Performance level Reference standardElectromagnetic compatibility Safety certificationAgency certification Korean RRLFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment Barracuda 7200.9 Serial ATA Product Manual, Rev. C Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingBarracuda 7200.9 Serial ATA Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Barracuda 7200.9 Serial ATA Product Manual, Rev. C Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Sata Barracuda 7200.9 Serial ATA Product Manual, Rev. C Page Seagate Technology LLC