Seagate ST940110A manual Supported ATA commands, Supported commands

Page 28

4.1.1Supported ATA commands

The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Draft ATA-6 Standard. See “S.M.A.R.T. commands” on page 23. for details and sub- commands used in the S.M.A.R.T. implementation.

Table 7:	Supported commands

Command name			Command code (in hex)

ATA-standard commands

ATA Device Configuration Overlay			B1H

ATA Service			A2H

Check Power Mode			98H, E5H

Download Microcode			92H

Execute Device Diagnostics			90H

Flush Cache			E7H

Flush Cache Extended			EAH

Format Track (Legacy)			50H

Identify Device			ECH

Idle			97H, E3H

Idle Immediate			95H, E1H

Initialize Device Parameters			91H

Read Buffer			E4H

Read DMA			C8H, C9H

Read DMA Extended			25H

Read Log Extended			22H

Read Multiple			C4H

Read Multiple Extended			29H

Read Native Max Address			F8H

Read Native Max Address Extended			27H

Read Sectors			20H, 21H

Read Sectors Extended			24H

Read Verify Sectors			40H, 41H

Read Verify Sectors Extended			42H

Recalibrate			10H

Security Disable Password			F6H

Security Erase Prepare			F3H

Security Erase Unit			F4H

Security Freeze Lock			F5H

Security Set Password			F1H

18	Momentus 4200 N-Lite Product Manual, Rev. A

Image 28

Contents Momentus 4200 N-Lite Page Momentus 4200 N-Lite Page Rev. a 10/26/2004 All Revision status summary sheetRevision Date Sheets Affected Page Contents Momentus 4200 N-Lite Product Manual, Rev. a List of Figures Viii Momentus 4200 N-Lite Product Manual, Rev. a Introduction Momentus 4200 N-Lite disc driveMomentus 4200 N-Lite Product Manual, Rev. a Drive specifications Specification summarySpecifications Drive specification ST940110ASpecifications Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Seek timePower specifications Time to readyConducted noise Typical current profileVoltage tolerance Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Configuring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Features register values Set Features command4 S.M.A.R.T. commands Supported S.M.A.R.T. commands Code in features register A.R.T. commandSeagate Technology support services Internet MySeagate Reseller.seagate.comPresales Support Technical SupportWarranty Service Authorized Service CentersCall Center Toll-free Direct dial Americas +1-405-324-47301 +1-405-324-4704Americas SEAGATE2 +1-405-324-47003 +1-405-324-4702 Call Center Toll-free Direct dial FAX / InternetCall Center Presales and Technical Support Warranty Service FAX Services-All Europe toll callToll-Free Support Numbers Asia/Pacific Support Services Momentus 4200 N-Lite Product Manual, Rev. a Index NumericsPage Page Momentus 4200 N-Lite Product Manual, Rev. a Page Seagate Technology LLC