Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
15 | AM stations | • AM | Medium Wave |
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER/
BAND button.
2 Tune in to the desired station.
Press the
1TUNER(BAND) button and select the FM band.
2 Press 
to select "89.10".
3 Press the TUNER MEMORY button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold
to automatically search for active broadcasting stations.
Briefly press 
to increase or decrease the frequency incrementally.
•Each time the button is pressed, the band switches between "FM ➝ AM".
TITLE | CHAP PRGM RDS RT | ST TUNED |
kHz MHz
•Refer to Step 2 on page 63 to automatically or manually tune in to a station.
TITLE | CHAP PRGM RDS RT | ST TUNED |
kHz MHz
•“PRGM” flashes in the display. Tune in to a station.
TITLE | RDS RT | ST TUNED |
|
| kHz |
|
| MHz |
Main Unit
Press the Function
1 button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
)
button to select
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button to select "MANUAL" and
then press and hold 
button to automatically search the band.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
Press 
4 to select preset
number.
•You can select between 1 and 15.
TITLE | RDS RT | ST TUNED |
|
| kHz |
|
| MHz |
5 | Press the TUNER | To preset another |
MEMORY button | station, repeat | |
again. | 6 steps 2 to 5. |
•Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and the station is stored in memory.
TITLE | CHAP | RDS RT | ST TUNED |
kHz MHz
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
63 | • | Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• | In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press 
on the remote control to select a channel.
64