Samsung HT-410HD Method1 When you connect to Video Out, Method 3 When you connect to DVI Video

Page 8

1p~40p(410HD)-GB 7/27/04 4:58 PM Page 16

Connectingthe Video Out to TV

Method1 When you connect to Video Out

 

Good Quality

1 Connect the Video Out to the Video

 

 

In on the TV.

 

 

2 Set the Video Input source on your TV

 

 

to the corresponding Video output on

 

 

your Home Theater.

Video Cable

or

 

(supplied)

 

 

Scart

 

Scart Adaptor

 

(supplied)

Method 3 When you connect to DVI Video

Connect if the TV has an DVI In jack.

1 Connect the DVI Out to the DVI Input on the TV.

2 Set the Video Input source on your TV to the corresponding DVI output on your Home Theater.

Best Quality

DVI Cable

(supplied)

CONNECTIONS

If your television is equipped with a SCART input,Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO jack on the Scart Adaptor, then connect the Scart Adaptor to the SCART IN jack on your television.

Method 2 When you connect to Component Out

Better Quality

Connect if the TV component input supports the resolution of over 576p(480p).

What is DVI (Digital Visual Interface)?

This device transmits DVD video signal digitally without the process of converting to analog. You can get sharper digital pictures by connecting the video to the TV using an DVI connection cable.

1 Connect the component output (PR, PB,

Y)to the component input on the TV (PR, PB, Y).

•Be sure to make the correct connections between the when you connect the component output jacks to the TV. If these are connected wrong, the screen may show red or blue, or there may be no screen at all.

2 Set the Video Input source on your TV to the corresponding Component output on your Home Theater.

Note

•

If the TV only supports a resolution of 576i(480i),

 

 

the screen may be divided into 2 screens, or

 

 

display nothing.

The Component input may be marked ‘DVD

input’ depending on the TV.

•If you connect the DVI and Component outputs (PR, PB, Y) at the same time, the Component output resolution changes automatically to the designated DVI resolution.

Example: If the TV connected to DVI can only support up to 576p(480p), the DVI and Component outputs are all converted to 576p(480p), even if you select the resolution switch to 1080i.

•If TV does not support HDCP (High-bandwidth Digital content protect), snow noise appears on the screen.

•Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a 576i(480i) DVD resolution output to 576p(480p)/720p/1080i.

•You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust themselves to the optimal resolution and aspect ratio if connected to DVI. (If the TV is an HDTV and has an DVI Video Input jack, output is automatically converted to the resolution of 1080i.)

•Component output will give video in ‘576p(480p)’ mode only during DVD disc playback applied with Macrovision.

•Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using DVI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.

•When both DVI connector and COMPONENT connector are connected, COMPONENT video is not displayed.

•See your TV owner's manual for more information on how to select the TV's Video Input source.

13

14

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Digital Home Cinema System Safety Warnings Precautions Class 1 Laser ProductContents Playable Discs Do not use the following types of discDisc Recording Format Copy ProtectionDescription Remove the battery Insert two 1.5V AAA Replace the batteryRange of Operation of the Remote Control Insert Remote BatteriesConnecting the Speakers Method1 When you connect to Video Out Method 3 When you connect to DVI VideoWhat is DVI Digital Visual Interface? ScartSelecting Resolution Set the resolution switch to 576p480pFM antenna connection AM antenna connectionConnecting External Components Press AUX on the remote control to select AUX 1 or AUXPower supply Press the Power button to turn on the TVPress TV/VIDEO button to select Video mode Press DVD button to select DVD/CD modeDisc Playback Press OPEN/CLOSE button to open the disc tray Load a discsPress OPEN/CLOSE button to close the disc tray Disc terminologyMP3 -CD Playback Press the Remain buttonPress Each time the Remain button is pressedPress Slide Mode button Jpeg File Playback JpegPress To skip to the next slide Press Cursor , , , buttons during playbackDivX Playback Displaying Disc Information Fast/Slow PlaybackPress Info button Press Slow buttonSkipping Scenes/Songs Repeat PlaybackBriefly press Press Repeat buttonRepeat Playback Angle Function Press Info button twicePress Enter DesiredPress EZ View button Zoom FunctionPress Enter button 1Press Info button Press the numeric buttonsPress Cursor , 3 buttons to move to Chapter display Press Cursor Press the numeric Buttons to selectUsing Disc Menu Using the Title MenuStop mode Press Menu button Press Menu button to exit the setup screenStop mode ‘Setup’ and thenPress Cursor Button to move to43 Pan&Scan Adjusting the TV Aspect Ratio Screen SizeLetterbox Setting Parental Controls Rating Level Enter the password Then press Enter buttonSetting the Password Press Open Close to close the disc tray Setting the Wallpaper Jpeg DVD VCDSetting the Wallpaper To Change the Wallpaper AV Sync Setup DVD Playback ModePress the Menu button Press Cursor , buttons Press Return button to return to the previous levelSetting the Speaker Mode Setting the Test ToneStop mode, press Menu button Press Test Tone buttonSetting the Delay Time Setting up the Speaker Delay TimePress Cursor button Then press EnterEnter button Setting the Audio QualityPress Sound Edit button and then press Cursor Press Cursor , to adjust the ‘DRC’ Sound Field DSP/EQ FunctionStop mode, press Menu buttonDolby Pro Logic II Effect Dolby Pro Logic II ModePress PL II Mode button Presetting Stations Listening to RadioAbout RDS broadcasting PTY Program Type indication and PTY-SEARCH functionTo confirm the sleep timer setting, press Sleep button Convenient FunctionsPress Sleep button Press Dimmer buttonTV Brand Code List Press the Mode button to make the TVIndicator on the remote control flash When operating a TV with the remote controlBefore Calling for Service Specifications Handling discsDisc Storage Handling and Storing DiscsMemo
Top Page Image Contents