Seagate ST9160827AS, ST9250827AS manual Reliability, Agency certification, Safety certification

Page 22

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

0.7%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to pro-

 

 

vide the drive serial number, model number (or part number) and country of pur-

 

 

chase. The system will display the warranty information for your drive.

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

14

Momentus 5400.4 SATA Product Manual, Rev. A

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Momentus 5400.4 Sata ST9250827AS ST9200827AS ST9160827AS ST9120817ASRev. a 10/23/07 Initial release Revision historyRevision Date Comments Momentus 5400.4 Sata Product Manual, Rev. a Momentus 5400.4 Sata Product Manual, Rev. a Contents Momentus 5400.4 Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableSleep mode Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeStart/stop times Typical seek times msec Read WritePower specifications Conducted noise Typical current profileDeferred spinup Voltage toleranceActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationDrive level acoustics Acoustic emissionElectromagnetic immunity Test for Prominent Discrete Tones PDTsReliability Safety certificationMeasurement type Specification Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 5400.4 Sata Product Manual, Rev. a Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsMomentus 5400.4 Sata Product Manual, Rev. a Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.4 Sata Product Manual, Rev. a Page Seagate Technology LLC

ST9120817AS, ST9160827AS, ST9200827AS, ST9250827AS specifications

The Seagate ST9250827AS, ST9200827AS, ST9160827AS, and ST9120817AS are notable hard drives that have made their mark in the storage industry, primarily due to their reliable performance, capacity options, and advanced technologies. Each model is tailored to meet the needs of different user scenarios, making them versatile choices for both personal and enterprise applications.

The ST9250827AS, with a capacity of 250GB, is designed for users requiring sufficient storage for general applications. Ideal for laptops and external drives, it offers a 5400 RPM spindle speed, ensuring quick access times and efficient data retrieval. The drive also incorporates Seagate’s Advanced Power Management technology, which helps extend battery life in portable devices by optimizing power consumption.

The ST9200827AS steps up with a 320GB capacity, catering to users needing increased storage for larger files, applications, and media collections. With similar 5400 RPM performance, it balances speed and energy efficiency. This model is suitable for those looking to enhance their mobile experience without sacrificing performance.

The ST9160827AS, a 160GB variant, is a compact solution for users needing a smaller footprint. It retains the energy efficiency and power management features present in the other models while delivering adequate performance for everyday computing tasks. This model is particularly suited for older machines or as a secondary drive in systems where space is at a premium.

Lastly, the ST9120817AS, with its 120GB capacity, is the smallest of the lot, perfect for basic storage needs. It’s well-suited for entry-level laptops or as a backup option for essential data. While its capacity may be limited compared to the others, it maintains the same reliability and efficiency attributed to Seagate’s technology.

All four models utilize Seagate's Drive Trust Technology, ensuring data integrity and security. They are built using Seagate's hard drive technologies that emphasize durability and reliability. These drives are also equipped with a SATA interface, facilitating fast data transfer rates and seamless integration with a wide range of computing devices.

In summary, the Seagate ST9250827AS, ST9200827AS, ST9160827AS, and ST9120817AS hard drives provide varying capacities and consistent performance, catering to diverse user requirements. Their blend of energy-efficient operation, advanced technology, and dependable storage solutions make them suitable for both personal and professional use, ensuring reliable data management across all applications.
Top Page Image Contents