Seagate ST32000641AS manual Ranty information for your drive

Drive specification	ST32000641AS
Voltage tolerance (including noise)	5V + 5%
	12V + 10%
Operating temperature	0° to 60°C
(Drive Case temperature)
Nonoperating temperature (Ambient)	–40° to 70°C
Temperature gradient (max)	20°C per hour max (operating)
	30°C per hour max (nonoperating)
Relative humidity	5% to 95% (operating)
	5% to 95% (nonoperating)
Relative humidity gradient (max)	30% per hour
Wet bulb temperature (max)	37.7°C max (operating)
	40.0°C max (nonoperating)
Altitude, operating	–60.96m to 3,048m
	(–200 ft to 10,000+ ft)
Altitude, nonoperating	–60.96m to 12,192m
(below mean sea level, max)	(–200 ft to 40,000+ ft)
Operational Shock (max)	63 Gs at 2ms
Non-Operational Shock (max)	300 Gs at 2ms
Vibration, operating	5 to 350Hz: 0.50 Gs
	350 to 500Hz: 0.25 Gs
Vibration, nonoperating	5 to 350Hz: 5.0 Gs
	350 to 500Hz: 2.0 Gs
Drive acoustics, sound power
Idle**	2.7 bels (typical)
	2.9 bels (max)
Performance	2.9 bels (typical)
	3.3 bels (max)
Nonrecoverable read errors	1 per 1014 bits read
Warranty	To determine the warranty for a specific drive, use a web browser to access the following web
	page: support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial
	number, model number (or part number) and country of purchase. The system will display the war-
	ranty information for your drive.
Load-unload cycles	300,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the	Yes
Serial ATA Revision 2.6 specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

4 Barracuda XT Series SATA Product Manual, Rev. C