Seagate ST32000641AS Shock, Operating shock, Nonoperating shock, Vibration, Operating vibration

Page 17

2.7.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.7.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2ms during read operations. Shocks should not be repeated more than two times per second.

2.7.5.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in perfor- mance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.

2.7.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.7.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.

5 to 350Hz	0.50 Gs

350 to 500Hz	0.25 Gs

2.7.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degrada- tion in performance when subsequently put into operation are specified below.

5 to 350Hz	5.0 Gs

350 to 500Hz	2.0 Gs

Barracuda XT Series SATA Product Manual, Rev. C

11

Image 17

Contents ST32000641AS Barracuda XT Series SataRevision Date Sheets affected or comments Revision historyContents Barracuda XT Series Sata Product Manual, Rev. C List of Figures Barracuda XT Series Sata Product Manual, Rev. C Introduction About the Serial ATA interface Drive specifications summary for 2000GB models Drive specificationsRanty information for your drive LBA mode Default logical geometryFormatted capacity Recording and interface technology2000GB model Physical characteristicsStart/stop times Power specifications Typical current profiles Active mode Power management modesIdle mode Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationAcoustics Drive A-weighted Sound Power Levels SWL, BAElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification WarrantyAgency certification Electromagnetic Compatibility EMCFCC verification Korean RRLAustralian C-Tick N176 Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions 2000GB modelHot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Segment Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordBarracuda XT Series Sata Product Manual, Rev. C Set Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index RRL Page Barracuda XT Series Sata Product Manual, Rev. C Page Seagate Technology LLC

Related manuals

Manual 42 pages 16.73 Kb