Samsung 20041112184518765 instruction manual Connecting your System to the Power Supply

Controlling a TV with the Remote

You can operate your TV by adjusting the DVD remote signal .

P.SCAN(Progressive Scan) Function

Unlike a regular Interlace Scan in which two fields of picture information are alternated to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. To enjoy a progressive scan video, connect a TV or monitor that supports a progressive scan input to this device.

1	Turn on the TV.
2	Point the DVD’s remote at the TV.
3	TV
	While holding the	button down, enter the
	code for your brand.

•If there is more than one code listed in the table, enter one at a time to determine which code works.

example : For SAMSUNG 1TVs		TV
While holding down the		button,
enter	.

Code	Brand	Code	Brand
01	SAMSUNG 1	16	SHARP 1
02	SHARP 2	17	ZENITH
03	SONY	18	LG 3
04	MAGNAVOX	19	DAEWOO 8
05	SANYO 1	20	SANYO 2
06	LG 2	21	EMERSON
07	RCA	22	SHARP 3
08	LG 1	23	SAMSUNG 4
09	TOSHIBA	24	MATSUSHITA
10	HITACHI	25	NOBLEX
11	JVC	26	TELEFUNKEN
12	PANASONIC 1	27	NEWSAN
13	MITSUBISHI 2	28	LOEWE
14	SAMSUNG 2	29	RCA2
15

While the player is in the Stop mode, hold the P.SCAN button down for longer than 1 second.

• The selection switches back and forth between "P.SCAN" and "I.SCAN"	CONNECTIONS
each time the button is held down for a minimum of 1 second.
• The previous mode is indicated in the display first, followed by the
selected mode in about a second.
P.Scan Adj (Progressive Scan Adjusting)

This function allows you to optimize the picture quality when it becomes poor due to screen distortion or discs containing erroneous data.

Press the Setup/P .Adj button. (Play mode only)

4 If the TV turns off, setup is complete. • The remote may not be able to

control every model TV of the brands listed.

Connecting your System to the Power Supply

The AC Cord must be plugged into an appropriate socket.

Before plugging your system into an AC outlet, you must check the voltage.

1.Plug the AC Cord on the rear of the system into an appropriate outlet.

2.Press the On/Standby button to switch your DVD Player system on.

15

•Each time the Setup/P .Adj button is pressed, the following appears on the TV screen:

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

In interlaced-scan video, a frame consists of two	The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field	video consecutively down the screen, line by line.
contains every other horizontal line in the frame.	As opposed to the interlaced scanning process by which a
The odd field of alternating lines is displayed first, and	video image is drawn in a series of passes, you get an
then the even field is displayed to fill in the alternating	entire image drawn at one time.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains	with moving objects. A camera that has the ability to
two interfaced fields, thus a total of 60 fields are	capture moving objects is called a "full frame shutter
displayed every 1/60th of a second each.	camera".
The interlaced scanning method is intended for capturing
a still object.

• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that
support Progressive Video. (It does not work on TVs with conventional component inputs,	16
i.e., non-progressive scan TVs.)

• Depending on the brand and model of your TV, this function may not work.