Seagate ST3450657SS Abort, Product warranty, Shipping, Product repair and return information

Page 25

6.2.6.2.5Abort

There are several ways to abort a diagnostic. You can use a SCSI Bus Reset or a Bus Device Reset message to abort the diagnostic.

You can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).

6.2.7Product warranty

Beginning on the date of shipment to the customer and continuing for the period specified in your purchase contract, Seagate warrants that each product (including components and subassemblies) that fails to function properly under normal use due to defect in materials or workmanship or due to nonconformance to the applica- ble specifications will be repaired or replaced, at Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. Seagate will pay for transporting the repair or replacement item to the customer. For more detailed warranty information, refer to the standard terms and conditions of purchase for Seagate products on your pur- chase documentation.

The remaining warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472. You can also determine remaining warranty using the Seagate web site (www.seagate.com). The drive serial number is required to determine remaining warranty information.

Shipping

When transporting or shipping a drive, use only a Seagate-approved container. Keep your original box. Sea- gate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty.

Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in tran- sit. Contact your authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment.

Product repair and return information

Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.

Cheetah 15K.7 SAS Product Manual, Rev. D

19

Image 25
Contents ST3450657SS ST3600857SSST3300457SS Standard models Self-Encrypting Drive modelsPage Contents Installation Defect and error managementAbout Fips About self-encrypting drives Interface requirementsPower Cheetah 15K.7 SAS Product Manual, Rev. D Seagate Online Support and Services Seagate Technology support servicesScope Standards Standards, compliance and reference documentsElectromagnetic compatibility Electromagnetic susceptibilityEuropean Union Restriction of Hazardous Substances RoHS ComplianceReference documents General description Media description Standard featuresPerformance Reliability Factory-installed optionsFormatted capacities Programmable drive capacityInternal drive characteristics Performance characteristicsAccess time Seek timeGeneral performance characteristics Format command execution time minutesStart/stop time Cache operation Prefetch/multi-segmented cache controlPrefetch operation Caching write dataError rates Reliability specificationsRecoverable Errors Unrecoverable ErrorsSeek errors Reliability and serviceInterface errors Preventive maintenanceControlling S.M.A.R.T 4 S.M.A.R.TPerformance impact MillisecondsDetermining rate Reporting controlPredictive failures Thermal monitorState of the drive prior to testing Temperature Log Page 0Dh Parameter Code DescriptionDrive Self Test DST DST failure definitionShort and extended tests Invoking DSTShort test Function Code 001b Extended test Function Code 010bAbort Product warrantyShipping Product repair and return informationAC power requirements Physical/electrical specificationsDC power requirements Gbit mode Amps 600 GB DC power requirements450 GB DC power requirements 300 GB DC power requirements Conducted noise immunity Power sequencingCurrent profiles Typical 600GB current profiles Typical 300GB current profiles Power dissipation 450GB model Environmental limits Temperature a. OperatingEffective altitude sea level a. Operating Relative humidityShock and vibration ShockPackage size Packaged/product weight Drop height Recommended mounting Vibration a. Operating-normalAcoustics Air cleanlinessCorrosive environment RoHS compliance statementUnits of Measure mm inches Mechanical specificationsPurpose About FipsLevel 2 security Admin SP Controlled accessAbout self-encrypting drives Data encryptionRandom number generator RNG Authenticated firmware downloadDrive locking Data bandsSupported commands Power requirementsDrive internal defects/errors Defect and error managementDrive error recovery procedures Page Background Media Scan SAS system errorsDeferred Auto-Reallocation Media Pre-ScanIdle Read After Write Drive orientation InstallationCooling Grounding Drive mountingInterface requirements SAS featuresCommands supported by Cheetah 15K.6 SAS family drives Scsi commands supportedDual port support Commands supported by Cheetah 15K.6 SAS family drives Commands supported by Cheetah 15K.6 SAS family drives Commands supported by Cheetah 15K.6 SAS family drives Cheetah 15K.7 inquiry data Bytes Data hex Inquiry dataMode Sense data Mode Pages 12.3.2.1 600GBmodel Mode Sense dataDEF CHG Mode Data Header Block Descriptor Mode Pages 12.3.2.2 450GB model Mode Sense dataDEF CHG Read Capacity Data Buffer C D E F Mode Pages 12.3.2.3 300GB model Mode Sense dataMiscellaneous features Miscellaneous operating features and conditionsSAS physical interface Miscellaneous statusDatum B Connector requirements Physical characteristicsPin descriptions Electrical descriptionSAS pin descriptions Power Signal characteristicsSAS transmitters and receivers Ready LED OutLED drive signal SAS-2 Specification complianceDifferential signals General interface characteristicsCheetah 15K.7 SAS Product Manual, Rev. D Numerics IndexPage SAS Smart
Related manuals
Manual 62 pages 52 Kb