Seagate ST760211DE manual Acoustics, Electromagnetic immunity, Reliability, Drive level acoustics

2.9Acoustics

Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). Discrete tone penalties are added to the A-weighted sound power (LW) with the following formula only when determin- ing compliance:

LWt(spec) == LW + 0.1Pt + 0.3 < 4.0 (Bels) where

LW = A-weighted sound power level

pt == Value of discrete tone penalty [==dLt-6.0 (dBA)]

dLt = Tone-to-noise ratio taken in accordance with ISO 7779 at each octave band.

All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.)

Table 6:	Drive level acoustics
Acoustic mode
Idle		Operational
1.6 bels (typ)		2.2 bels (typ)

2.10Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 7:	Electromagnetic immunity
			Performance	Reference
Test		Description	level	standard
Radiated RF immunity		80 to 1,000 MHz, 3 V/m,	A	EN 61000-4-3: 96
		80% AM with 1 kHz sine		ENV 50204: 95
		900 MHz, 3 V/m, 50% pulse modulation @ 200
		Hz
Electrical fast transient		± 1 kV on AC mains, ± 0.5 kV on external I/O	B	EN 61000-4-4: 95
Surge immunity		± 1 kV differential, ± 2 kV common, AC mains	B	EN 61000-4-5: 95
Conducted RF immunity		150 kHz to 80 MHz, 3 Vrms, 80% AM with 1	A	EN 61000-4-6: 97
		kHz sine
Voltage dips, interrupts		0% open, 5 seconds	C	EN 61000-4-11: 94
		0% short, 5 seconds	C
		40%, 0.10 seconds	C
		70%, 0.01 seconds	B

2.11	Reliability
Measurement type		Specification
Nonrecoverable read errors		1 per 1014 bits read, max.
Load/Unload (LUL) cycles		20,000 power loss

14 Lyrion Series IDE Product Manual, Rev. B