![](/images/new-backgrounds/1030978/3097855x1.webp)
Tape Operation/Recording
E n g l i s h
Notes:
–The tape counter will automatically set to zero after detecting end of tape.
General Information on
Recording
●If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source.
●For recording, use only tape of IEC type I (normal tape).
●The recording level is set automatically, regardless of the position of the Volume,VAC, DSC and so forth.
●The tape is secured at both ends with leader
tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
●To prevent accidental recording,
break out the tab on the left shoulder of the tape side you want to protect.
●If “CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
IMPORTANT!
–Recording is permissible if copyright or other rights of third parties are not infringed upon.
–Recording is possible only on tape deck 2.
Preparation for Recording
1Press TAPE (TAPE 1•2) to select TAPE 2.
2Load a recordable tape into tape deck 2 with full spool to the left.
3Prepare the source to be recorded. VCD – load the disc(s).
TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜ starts flashing.
●It is not possible to listen to another sources except when dubbing tapes.
●It is not possible to activate the timer function.
One Touch Recording/Recording the mixed sound
1Press VCD, TUNER or AUX to select the source.
●You can connect a microphone to record the
mixed sound in tape deck 2 (refer to “Karaoke - Microphone Mixing”).
2Start playback of the selected source.
3Press REC to start recording.
To stop recording
●Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will be displayed.
CD/VCD/MP3-CD Synchro Recording
1Press VCD to select the disc.
●Press í or ë to select the desired track to start recording.
●You can programme the tracks in the order you want them to be recorded (refer to “CD/VCD/
2Press REC to start recording.
➜ The disc will start playback automatically.
28
pg | 28 | 4/16/02, 6:44 PM 3139 115 21281 |