![](/images/new-backgrounds/1030978/3097817x1.webp)
Preparations
BAntennas Connection
Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
AM Antenna
●Position the antenna as far as possible from a TV, VCR or other radiation source.
FM Antenna
● For better FM stereo reception, connect an outdoor FM antenna to the
FM ANTENNA terminal.
CSpeakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to
1 | 2 |
●Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
DVideo Out Connection
Connect the VIDEO OUT (CVBS) terminal at the rear of the system to the TV or VCR VIDEO IN for viewing or recording.
Note:
– To avoid magnetic interference, do not position the front speakers too close to the TV.
EConnecting other equipment to your system
Connect the audio left and right OUT terminals of a TV,VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals.
Note:
– If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX/CDR IN left terminal. Alternatively, you can use a “single to double” cinch cable (still be mono sound).
FPower Booster Connection
| VOLUME |
|
|
|
|
|
7 |
| BOOSTER IN |
|
|
| |
1 | R | L | POWER SWITCH | 5 | ||
|
| OFF | ON | |||
|
| SPEAKERS 6Ω |
|
|
| |
| 2 | – | + | AC MAINS | 4 | |
| L | L |
|
| ||
|
| R | R |
|
|
|
6 |
| – | + | VOLTAGE |
| |
|
|
|
| 3 | ||
|
|
|
| SELECTOR | ||
|
|
|
| 110V- | 220V- | |
|
|
|
| 127V | 240V |
|
1Connect the BOOSTER OUT (Right and Left) terminals of the mini system to the power booster amplifier BOOSTER IN (Right and Left) terminals respectively.
2Connect the speaker wires to the BOOSTER
SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to
English
9
pg | 9 | 4/16/02, 6:42 PM 3139 115 21281 |