Philips FW-V795 manual Are pressed, Sound cannot be heard or is of poor, Quality, Properly

			Troubleshooting
GENERAL
	The system does not react when buttons	–	Remove and reconnect the AC power plug and
	are pressed.		switch on the system again.
	Sound cannot be heard or is of poor	–	Adjust the volume.
	quality.	–	Disconnect the headphones.
		– Check that the speakers are connected correctly.
		– Check if the stripped speaker wire is clamped.
		– Make sure the MP3-CD was recorded within
			32-256 kbps bit rate with sampling frequencies
			at 48 kHz, 44.1 kHz or 32 kHz.
	The left and right sound outputs are	–	Check the speaker connections and location.
	reversed.
	The remote control does not function	–	Select the source (VCD or TUNER, for example)
	properly.		before pressing the function button (É,í,ë).
		– Reduce the distance between the remote control
			and the system.
		– Insert the batteries with their polarities
			(+/– signs) aligned as indicated.
		–	Replace the batteries.
		– Point the remote control directly toward
			IR sensor on the front of the system.
	The timer is not working.	–	Set the clock correctly.
		– If a recording is in progress, stop the recording.
	Not all lighted buttons are showing light.	–	Press DISPLAY to select NORMAL or MODE 1
			display mode.
	The Clock/Timer setting is erased.	–	Power has been interrupted or the power cord
			has been disconnected. Reset the clock/timer.
	The system displays features	–	Press and hold DEMO STOP Çon the system
	automatically and buttons start flashing.		to switch off the demonstration.

E n g l i s h

35

pg 001-035/V795/21-Eng 35 4/16/02, 6:44 PM 3139 115 21281