Seagate ST3600002SS, ST3450802SS manual Shipping

Page 23

warranty information, refer to the standard terms and conditions of purchase for Seagate products on your pur- chase documentation.

The remaining warranty for a particular drive can be determined using the Seagate web site: (http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance).

The drive serial number is required to determine remaining warranty information.

Shipping

When transporting or shipping a drive, use only a Seagate-approved container. Keep your original box. Seagate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty.

Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in tran- sit. Contact your authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment.

Product repair and return information

Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.

Cheetah NS 10K.2 SAS Product Manual, Rev. F

19

Image 23

Contents ST3600002SS ST3450802SS Cheetah NS 10K.2 SASPage Contents Interface requirements Defect and error managementInstallation Seagate Online Support and Services Seagate Technology support servicesScope Electromagnetic susceptibility Standards, compliance and reference documentsStandards Electromagnetic compatibilityCompliance Reference documents General description Reliability Standard featuresMedia description PerformanceProgrammable drive capacity Factory-installed optionsFormatted capacities Seek performance Performance characteristicsInternal drive characteristics Access timeStart/stop time Format command execution time minutesGeneral performance characteristics Caching write data Prefetch/multi-segmented cache controlCache operation Prefetch operation Unrecoverable Errors Reliability specificationsError rates Recoverable ErrorsHot plugging the drive Reliability and serviceInterface errors Preventive maintenanceReporting control 4 S.M.A.R.TControlling S.M.A.R.T Performance impactDrive Self Test DST Temperature Log Page 0Dh Parameter Code DescriptionPredictive failures Thermal monitorImplementation DST failure definitionExtended test Function Code 010b Product warrantyShort test Function Code 001b Shipping ST3600002SS DC power requirements Physical/electrical specificationsAC power requirements DC power requirementsGeneral DC power requirement notes ST3450802SS DC power requirementsCurrent profiles Power sequencingConducted noise immunity Typical ST3600002SS drive +5V and +12V current profiles ST3450802SS Power dissipationST3600002SS Environmental limits Temperature a. OperatingShock Relative humidityEffective altitude sea level a. Operating Shock and vibrationRecommended mounting Corrosive environment Air cleanlinessVibration a. Operating-normal AcousticsChina Restriction of Hazardous Substances RoHS Directive Physical dimensions Mechanical specificationsDrive error recovery procedures Defect and error managementDrive internal defects/errors 77.81 Deferred Auto-Reallocation SAS system errorsBackground Media Scan Media Pre-ScanIdle Read After Write Drive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Commands supported by Cheetah NS 10K.2 SAS family drives Scsi commands supportedCommands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives 10.3.2Mode Sense data Inquiry dataPage Mode Pages 10.3.2.1 ST3600002SS Mode Sense data10.3.2.2 ST3450802SS Mode Sense data Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features SAS physical interface Datum B Connector requirements Physical characteristicsSAS pin descriptions Electrical descriptionPin descriptions Ready LED Out Signal characteristicsPower SAS transmitters and receivers10.5.2.1 Eye masks 10.5.2.1.1 Eye masks overview LED drive signalDifferential signals General interface characteristicsReceive eye mask 2OP 0, 5 xadditional sinusoidal jitter X 1OP Transmitter signal characteristics Maximum allowable jitter Receiver signal characteristicsImpedance requirements Sheet 1 Compliant jitter test pattern CjtpatElectrical TxRx connections Impedance requirements Sheet 2= -5, 437dB Shows the zero-length test load Additional information SAS-2 Specification complianceReceiver characteristics Cheetah NS 10K.2 SAS Product Manual, Rev. F Index Page SAS See also cooling Page Americas Seagate Technology LLC

Related manuals

Manual 74 pages 45.81 Kb