Seagate ST3450802SS, ST3600002SS manual Vibration a. Operating-normal, Acoustics, Air cleanliness

Page 32

7.4.4.2Vibration a. Operating—normal

The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding

10 - 300 Hz

1.0 G RMS (0 to peak)

301 - 500 Hz

0.5 G RMS (0 to peak)

Vibration may be applied in the X, Y, or Z axis.

b.Operating—abnormal

Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding:

15 minutes of duration at major resonant frequency

Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available.

Operating abnormal translational random flat profile

5 - 500 Hz

0.75 G (0 to peak)

10-300 Hz

0.0029 G2/Hz

c.Non-operating

The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive shall not incur physical damage or degraded performance as a result of continuous vibration not

exceeding

 

 

5 - 22 Hz

0.25 G (0 to peak, linear, swept sine, 0.5 octive/min)

22 - 350 Hz

3

G (0 to peak, linear, swept sine, 0.5 octive/min)

350 - 500 Hz

1

G (0 to peak, linear, swept sine, 0.5 octave/min)

Vibration may be applied in the X, Y, or Z axis.

7.4.5Acoustics

Sound power during idle mode shall be 3.4 bels typical when measured to ISO 7779 specification. Sound power while operating shall be 3.6 bels typical when measured to ISO 7779 specification.

There will not be any discrete tones more than 10 dB above the masking noise on typical drives when mea- sured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any drive.

7.4.6Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.

7.4.7Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate every potential application environment.

Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corro- sive chemicals as electronic drive component reliability can be affected by the installation environment. The sil- ver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or

28

Cheetah NS 10K.2 SAS Product Manual, Rev. F

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Cheetah NS 10K.2 SAS ST3600002SS ST3450802SSPage Contents Interface requirements Defect and error managementInstallation Seagate Technology support services Seagate Online Support and ServicesScope Standards, compliance and reference documents StandardsElectromagnetic compatibility Electromagnetic susceptibilityCompliance Reference documents General description Standard features Media descriptionPerformance ReliabilityProgrammable drive capacity Factory-installed optionsFormatted capacities Performance characteristics Internal drive characteristicsAccess time Seek performanceStart/stop time Format command execution time minutesGeneral performance characteristics Caching write data Prefetch/multi-segmented cache controlCache operation Prefetch operation Reliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Interface errorsPreventive maintenance Hot plugging the drive4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlTemperature Log Page 0Dh Parameter Code Description Predictive failuresThermal monitor Drive Self Test DSTDST failure definition ImplementationExtended test Function Code 010b Product warrantyShort test Function Code 001b Shipping Physical/electrical specifications AC power requirementsDC power requirements ST3600002SS DC power requirementsST3450802SS DC power requirements General DC power requirement notesCurrent profiles Power sequencingConducted noise immunity Typical ST3600002SS drive +5V and +12V current profiles ST3450802SS Power dissipationST3600002SS Temperature a. Operating Environmental limitsRelative humidity Effective altitude sea level a. OperatingShock and vibration ShockRecommended mounting Air cleanliness Vibration a. Operating-normalAcoustics Corrosive environmentChina Restriction of Hazardous Substances RoHS Directive Mechanical specifications Physical dimensionsDrive error recovery procedures Defect and error managementDrive internal defects/errors 77.81 SAS system errors Background Media ScanMedia Pre-Scan Deferred Auto-ReallocationIdle Read After Write Installation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Commands supported by Cheetah NS 10K.2 SAS family drivesCommands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Commands supported by Cheetah NS 10K.2 SAS family drives Inquiry data 10.3.2Mode Sense dataPage 10.3.2.1 ST3600002SS Mode Sense data Mode Pages10.3.2.2 ST3450802SS Mode Sense data Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features SAS physical interface Datum B Physical characteristics Connector requirementsSAS pin descriptions Electrical descriptionPin descriptions Signal characteristics PowerSAS transmitters and receivers Ready LED OutLED drive signal Differential signalsGeneral interface characteristics 10.5.2.1 Eye masks 10.5.2.1.1 Eye masks overviewReceive eye mask 2OP 0, 5 xadditional sinusoidal jitter X 1OP Transmitter signal characteristics Receiver signal characteristics Maximum allowable jitterCompliant jitter test pattern Cjtpat Impedance requirements Sheet 1Impedance requirements Sheet 2 Electrical TxRx connections= -5, 437dB Shows the zero-length test load Additional information SAS-2 Specification complianceReceiver characteristics Cheetah NS 10K.2 SAS Product Manual, Rev. F Index Page SAS See also cooling Page Seagate Technology LLC Americas
Related manuals
Manual 74 pages 45.81 Kb
Top Page Image Contents