Seagate ST35000414SS, ST35000415SS Applicable standards and reference documentation, Standards

Page 10

2.0Applicable standards and reference documentation

The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depends on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temper- ature regulation. In particular, the drive must be securely mounted to guarantee the specified performance characteristics. Mounting by bottom holes must meet the requirements of Section 9.3.

2.1Standards

The Constellation ES family complies with Seagate standards as noted in the appropriate sections of this man- ual and the Seagate SAS Interface Manual, part number 100293071.

The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-1 as tested by TUV.

The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Spec- ification” and the “TCG Storage Workgroup Security Subsystem Class: Enterprise_A” specification with addi- tional vendor-unique features as noted in this product manual.

2.1.1Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the Radio Interference Regulations of the Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.

2.1.1.1Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Table 2, DC power requirements.

2

ConstellationES Series SAS Product Manual, Rev. D

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Standard Models ST32000444SS ST31000424SS ST3500414SSST32000445SS ST31000425SS ST3500415SS Self-Encrypting Drive ModelsRevision history Contents About self-encrypting drives Defect and error managementInstallation Interface requirementsSeagate Technology support services ConstellationES Series SAS Product Manual, Rev. D List of Figures ST32000444SS & ST32000445SS model current profilesConstellationES Series SAS Product Manual, Rev. D Scope Electromagnetic compatibility Applicable standards and reference documentationStandards Electromagnetic susceptibilityAustralian C-Tick Electromagnetic complianceElectromagnetic compliance for the European Union Korean KCCReference documents European Union Restriction of Hazardous Substances RoHSGeneral description Standard features Media descriptionFormatted capacities PerformanceReliability Programmable drive capacityFactory-installed options Seek performance characteristics Performance characteristicsInternal drive characteristics Access timeGeneral performance characteristics Start/stop timePrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operationRecoverable Errors Reliability specificationsError rates Unrecoverable ErrorsInterface errors Reliability and serviceSeek errors Preventive maintenancePerformance impact 4 S.M.A.R.TControlling S.M.A.R.T Reporting controlPredictive failures Temperature Log Page 0Dh Parameter Code DescriptionThermal monitor DST failure definition State of the drive prior to testingDrive Self Test DST ImplementationExtended test Function Code 010b Short and extended testsShort test Function Code 001b Log page entriesShipping Product warrantyProduct repair and return information PowerChoiceTM power management Physical/electrical specificationsPowerChoice modes AC power requirements DC power requirementsConstellationES Series SAS Product Manual, Rev. D ConstellationES Series SAS Product Manual, Rev. D Page Power sequencing General DC power requirement notesConducted noise immunity Current profiles ST32000444SS & ST32000445SS model current profilesST31000424SS & ST31000425SS model current profiles ST3500414SS & ST3500415SS model current profiles Power dissipation ST32000444SS and ST32000445SS in 3Gb operationST32000444SS and ST32000445SS in 6Gb operation ST31000424SS and ST31000425SS in 3Gb operation ST31000424SS and ST31000425SS in 6Gb operation ST3500414SS and ST3500415SS in 3Gb operation ST3500414SS CURRENT/POWER vs Throughput SAS 3.0GBOs per Second ST3500414SS and ST3500415SS in 6Gb operation Environmental limits Temperature a. OperatingRelative humidity Shock and vibration Effective altitude sea level a. OperatingShock Recommended mounting Acoustics Air cleanlinessVibration a. Operating-normal Corrosive environmentElectromagnetic susceptibility Mechanical specifications Mounting configuration dimensionsAbout self-encrypting drives Controlled accessAdmin SP Data encryptionDrive locking Default passwordRandom number generator RNG Data bandsSupported commands Authenticated firmware downloadPower requirements Cryptographic eraseDrive internal defects/errors Defect and error managementDrive error recovery procedures SAS system errors Media Pre-Scan Background Media ScanDeferred Auto-Reallocation Idle Read After Write Installation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Supported commandsSupported commands Supported commands Supported commands Inquiry data Mode Sense dataConstellation ES inquiry data Page Mode Data Header 74 70 6d b0 00 00 02 3a 38 60 30 00 00 02 Miscellaneous features Miscellaneous operating features and conditionsMiscellaneous status SAS physical interface Datum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin descriptionsSAS transmitters and receivers Signal characteristicsPower Ready LED OutDifferential signals SAS-2 Specification ComplianceLED drive signal General interface characteristicsWeb Seagate Technology support servicesWarranty Support Direct.seagate.com Spp.seagate.com Presales SupportData Recovery Services Call Center Toll-free Direct dial Technical Support Warranty ServiceData Recovery Services Authorized Service Centers Presales SupportIndex NumericsKCC Msid Mtbf See also cooling Page ConstellationES Series SAS Product Manual, Rev. D Page Seagate Technology LLC
Top Page Image Contents