Western Telematic MT5634, MT9234 Command #CBF? Callback Failed Attempts Display, Command #CBNy=x

		AT Commands
Command: #CBF? Callback Failed Attempts Display
Values:		N/A
Default:		N/A
Description:		Requests the number of failed callback passwords since reset
		or power-up. This number can be stored to nonvolatile memory
		using the &W command.
Command:	#CBFR Callback Failed Attempts Reset
Values:		N/A
Default:		N/A
Description:		Resets the number of failed callback passwords to 0. This does
		not reset the number stored in nonvolatile memory.
Command:	#CBIn	Local Callback Inactivity Timer
Values:		n = 1–255
Default:		20
Description:		Sets the time (in minutes) that the modem waits for a command
		before forcing the user to enter the setup password again.
Command: #CBNy=x
		Store Callback Password
Values:		y = 0–29
		x = password
Defaults:		None
Description:		Sets the callback security password for the y memory location.
		The password must have 6 to 10 characters, and cannot include
		the + or - ¬characters.
Command:	#CBPn	Callback Parity
Values:		n = 0, 1, or 2
Default:		0
Description:		Sets parity for the callback security messages.
		#CBP0 No parity.
		#CBP1 Odd parity.
		#CBP2 Even parity.
Command:	#CBRy	Callback Security Reset
Values:		y = 0–29
Default:		None
Description:		Clears the password and phone number in the y memory location.

3-15