Western Telematic MT9234 Command #CBSn Callback Enable/Disable, Command #Pn Set 11-bit Parity

MT5634/MT9234 Modem; AT Command Set

Command:	#CBSn Callback Enable/Disable
Values:	n = 0, 1, 2, or 3
Default:	0
Description:	#CBS0 Disables callback security.
	#CBS1 Enables local and remote callback security.
	#CBS2 Enables remote callback security only.
	#CBS3 Disables callback security until local hang-up or reset.

Command: #Pn	Set 11-bit Parity
Values:	n = 0 or 1
Default:	2
Description:	#P0	No parity.
	#P1	Odd parity.
	#P2	Even parity.

Command: #Sx	Enter Setup Password
Values:	x= password (1–8 characters, case sensitive)
Default:	MTSMODEM
Description:	Enters the remote configuration setup password.

Command: #S=x	Store Setup Password
Values:	x= password (1–8 characters, case sensitive)
Default:	MTSMODEM
Description:	Stores a new remote configuration setup password.

3.1 Escape AT Commands

Command: +++AT<CR>	Escape Sequence
Values:	N/A
Description:	Puts the modem in command mode (and optionally
	issues a command) while remaining online. Type
	+++AT and up to six optional command characters;
	then press [Enter]. Used mostly to issue the hang-up
	command: +++ATH<CR>.
Command: %%%ATMTSMODEM<CR>
	Remote Configuration Escape Sequence
Values:	N/A
Description:	Initiates remote configuration mode while online
	with remote modem. The remote configuration
	escape character (%) is defined in register S13.

3-16