Western Telematic MT9234, MT5634 Command P Pulse Dialing, Command Qn Result Codes Enable/Disable

MT5634/MT9234 Modem; AT Command Set

Command: P	Pulse Dialing
Values:	P, T
Default:	T
Description:	Configures the modem for pulse (non-touch-tone) dialing. Dialed
	digits are pulsed until a T command or dial modifier is received.

Command: Qn	Result Codes Enable/Disable
Values:	n = 0 or 1
Default:	0
Description:	Q0	Enable result codes.
	Q1	Disable result codes.
	Q2	Returns an OK for backward compatibility with
		some software.

Command: Sr=n	Set Register Value
Values:	r = S-register number; n varies
Default:	None
Description:	Set value of register Sr to value of n, where n is entered in
	decimal format (e.g., S0=1).

Command: Sr?	Read Register Value
Values:	r = S-register number
Default:	None
Description:	Read value of register Sr and display it in 3-digit decimal form
	(e.g., S2? gives the response 043).

Command: T	Tone Dialing
Values:	P, T
Default:	T
Description:	Configures the modem for DTMF (touch-tone) dialing. Dialed
	digits are tone dialed until a P command or dial modifier
	is received.

Command: Vn	Result Code Format
Values:	n = 0 or 1
Default:	1
Description:	V0	Displays result codes as digits (terse response).
	V1	Displays result codes as words (verbose response).

3-4