Western Telematic 12651 manual Page10, On / OFF / Boot Examples

RPB+User'sGuide

6.Set Plugs to Default: To set all plugs to the Power-Up Defaults, type /D [Enter]. Note that if the Default String includes missing or invalid characters, the /D command will not function.

7.Exit: To exit from command mode, type /X [Enter].

Note:

When the /n ON/OFF/BOOT command is invoked, the port (n) must be specified by number. The Port Label cannot be used to specify the desired port.

ON / OFF / BOOT Examples:

￿To Switch Plug 3 ON, type /3 ON [Enter].

￿To switch all plugs ON, type /* ON [Enter].

￿To switch plug 5 OFF, type /5 OFF [Enter].

￿To switch all plugs OFF, type /* OFF [Enter].

￿To initiate a boot cycle at Plug 2, type /2 BOOT [Enter].

￿To initiate a boot cycle at all plugs, type /* BOOT [Enter].

Page10