Western Telematic 12651 manual Introduction, Features, Bold Font

1.Introduction

Network equipment sometimes "locks-up", making it impossible to communicate. The RPB+ Remote Power Boot Switch can switch AC power on 5 individually controlled plugs, allowing attached equipment to reset (re-boot).

ASCII commands are sent to the RS-232 Control Port to select plugs, and specify On, Off, or Boot operations. A convenient Status Screen shows On/Off conditions at each plug. RPB+ features include a security password, Location I.D. field, and plug labels to identify the device connected to each plug.

Features:

￿Remotely Toggles AC Power to Five Separate Outlets.

￿Serial RS232 Control Port Interfaces Directly with a PC or External Modem, Allowing Local or Remote Control.

￿Status Display Shows Plug Labels and On/Off Conditions.

￿Simple ASCII Commands for On, Off, or Boot (Off/On).

￿User-Selectable Re-Boot Cycle Duration (Off Time).

￿User-Programmable Password Feature.

￿User-Programmable Location I.D.

￿User-Selectable Echo Mode.

￿User-Programmable Plug Labels.

￿User-Programmable Power-Up Defaults.

￿Requires Only One Rack Space.

￿Available in 115 VAC or 230 VAC Configurations

Typographic Conventions

Throughout this manual, typefaces and characters have been used to denote the following:

COURIER FONT	Indicates characters typed on the keyboard.
	For example, /S or /3 ON.
[Bold Font]	Text set in bold face and enclosed in
	square brackets indicates a specific key.
	For example, [Enter] or [Esc].	Page1