Tyco Electronics 15A2 15" LCD Multifuntion Touchcomputer, ESY15A2 Power Control, Power Button

Page 29

Power Control

Power Button

The power button function can be set by the operating system under:

Control Panel->Display Properties->Screen Saver->Power->Advanced->Power

Buttons

To override all Operating System settings and shut down the touchcomputer, press and hold the power button for 7 seconds.

Note: This function will not work if the power button is locked as described in the section below.

Power Lockout

You are able to lock and unlock the Power button. The touchcomputer is defaulted in the unlocked position.

To lock the Power:

While the OSD is not displayed, press the Menu button and DOWN simultaneously for 2 seconds. A window will appear displaying "Power Unlocked". Continue to hold the buttons down for another 2 seconds. When the window toggles to "Power Locked" release both buttons to lock the Power button.

To unlock the Power:

Press the Menu button and DOWN simultaneously for 2 seconds. A window will appear displaying "Power locked". Continue to hold the buttons down for another 2 seconds. When the window toggles to "Power Unlocked" release both buttons to unlock the Power button.

Elo TouchSystems 15A2 User Guide 29

Image 29

Contents Touchcomputer User Guide Elo TouchSystems Touchcomputer User Guide Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Regulatory Information Warranty Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Calibration Testing the TouchscreenTest Devices Testing in USB MSR Human Interface Device HID Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Keyboard KB Emulation Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the Speaker Bar optional Testing the TV tuner optional Testing the Wireless Card optionalTesting the Modem Cardoptional Testing the Cash Drawer PortElo TouchSystems 15A2 User Guide Operation OSD Menu OSD ControlShortcut keys OSD LockoutTo lock the OSD To unlock the OSDPower Button Power ControlPower Lockout To lock the PowerUsing the I/O panel KensingtonTM Lock PS/2 UniversalTV Tuner optional Mounting Option Securing the Touchcomputer BaseSnap off stand cover Mount as shownBottom View Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your TouchcomputerServicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage RS485 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS422 Mode Pin Definitionfor COM2 only Power Input Pin Definition Control Cash Drawer Port Signal Definition and ControlESY15A2 Display SpecificationsPower Supply Specifications Touchscreen Specifications Magnetic Stripe Reader MSR Peripheral SpecificationsCustomer Display USB VersionFingerprint Reader Barcode Scanner One-Dimensional scanner specificationsSpeaker Bar TV Tuner Card Wireless CardModem Card Temperature Ranges Environmental SpecificationsUsing the Web Using the Phone Using the TouchcomputerTechnical Support Technical AssistanceII. Emissions and Immunity Information Electrical Safety InformationRegulatory Information Page III. Safety Label Warranty Page Check out Elo’s Website