Tyco Electronics 15A2 15" LCD Multifuntion Touchcomputer Peripheral Specifications, USB Version

Page 49

Peripheral Specifications

Magnetic Stripe Reader (MSR)

The MSR is a USB 1.1 device which reads all three data stripes on standard credit cards or driver’s licenses conforming to ISO/ANSI standards. The MSR has foreign language capability. The credit card is read by sliding the credit card through the MSR, stripe side toward the display, forward or backward. The MSR is powered from the USB port; no external power is needed. The specifications are:

•Power source: from USB port

•Message format: ASCII

•Card speed: 3 to 50 IPS

•Electronics MTBF: 125,000 hours

•Mechanical MTBF: 1,000,000 passes

•Operating current: 30 mA maximum

•Non-operating current: 300u maximum

Customer Display

The Customer Display is a twenty character two line vacuum fluorescent display (VFD). It consists of a VFD and VFD controller.

USB Version

Optional Parameters
Characters per row	20
Number of rows	2
Character configuration	5x7 dot matrix
Character Height	9.5mm
Character width	6.2mm
Character configuration	ASCII
Character color	Blue green
MTBF	300,000 hours

Elo TouchSystems 15A2 User Guide 49

Image 49

Contents Touchcomputer User Guide Elo TouchSystems Touchcomputer User Guide Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Regulatory Information Warranty Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Test Devices Testing the TouchscreenCalibration Testing in USB MSR Keyboard KB Emulation Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Human Interface Device HID Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the Speaker Bar optional Testing the TV tuner optional Testing the Wireless Card optionalTesting the Modem Cardoptional Testing the Cash Drawer PortElo TouchSystems 15A2 User Guide Operation OSD Menu OSD ControlShortcut keys OSD LockoutTo lock the OSD To unlock the OSDPower Button Power ControlPower Lockout To lock the PowerUsing the I/O panel TV Tuner optional PS/2 UniversalKensingtonTM Lock Mounting Option Securing the Touchcomputer BaseSnap off stand cover Mount as shownBottom View Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your TouchcomputerServicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage RS422 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS485 Mode Pin Definitionfor COM2 only Power Input Pin Definition Control Cash Drawer Port Signal Definition and ControlESY15A2 Display SpecificationsPower Supply Specifications Touchscreen Specifications Magnetic Stripe Reader MSR Peripheral SpecificationsCustomer Display USB VersionFingerprint Reader Barcode Scanner One-Dimensional scanner specificationsSpeaker Bar TV Tuner Card Wireless CardModem Card Temperature Ranges Environmental SpecificationsUsing the Web Using the Phone Using the TouchcomputerTechnical Support Technical AssistanceRegulatory Information Electrical Safety InformationII. Emissions and Immunity Information Page III. Safety Label Warranty Page Check out Elo’s Website