Servicing the Hard Disk Drive and Compact Flash Card
When removing or installing a hard disk drive, first turn the touchcomputer off and remove the power supply connection.
To Install the Hard Disk Drive
1.Place the unit face down and remove the back grill. Then remove the 6 screws as shown below and remove the back cover insert.
2.If you have an existing hard drive, remove the existing hard drive by pulling down and to the left.
3.Remove the the hard drive caddy from the old hard drive and mount it into the new hard drive:
4.Grasp the handle of the caddy with the new hard drive and slide the hard drive into the hard drive space. Push the hard drive up until it snap locks into the connector.
5.Replace the back cover insert, 6 screws and back grill.