MT-RJ Connector Products

Siemon provides a complete line of MT-RJ Small Form Factor (SFF) interconnect products — providing the utmost in versatility and performance. Siemon MT-RJ connectors pack all the benefits of duplex fibre optic performance in a compact “RJ” style design. Two key features have been incorporated into Siemon’s MT-RJ system. The first is the hinged adapter latch which allows for easy corrections of polarity errors. The second feature is the lead-in tube of both the 62.5 and 50 micron connectors which utilizes a dual entrance tube to facilitate easier routing of fibres into the connector.

No one offers a wider variety of MT-RJ solutions for the work area or the telecommunications room. Siemon MT-RJ work area adapter products are compatible with our current line of MAX® and CT® products, MX-SM®Boxes, and Fibre Outlet Boxes (FOB2), providing a range of solutions as well as the ability to mix copper and fibre in a single faceplate or service box. In the telecommunications room, our MT-RJ Quick-Pack™adapter plates fit into our popular line of RIC3, SWIC3, and FCP3 fibre enclosures.

FIBRE PRODUCTS

Two boots are included to enable termination of either 3.0mm round duplex cable or 900µm buffered fibre

Proven no epoxy/no polish termination method terminates in less than 2 minutes — less than 1 minute per fibre

Snagless latch — MT-RJ connectors use the familiar “RJ” style latch found on modular plugs

Optical performance meets ANSI/TIA/EIA-568-B.3 and ISO/IEC 11801 Ed 2.0 requirements

Factory-polished connectors assure optimum performance and reliability

Higher density — MT-RJ connectors are one-third the size of duplex SC connectors, providing significantly higher density

MT-RJ MAX Modules with MT-RJ Jumper

The Siemon MT-RJ Field Termination Kit (FTERM-

MT) is used to terminate connectors in the field

W W W . S I E M O N . C O M