Tyco Electronics 17A2 manual Power Control, Power Button, Power Lockout, To lock the Power

Page 28

Power Control

Power Button

The power button function can be set by the operating system under:

Control Panel->Display Properties->Screen Saver->Power->Advanced->Power

Buttons

To override all Operating System settings and shut down the touchcomputer, press and hold the power button for 7 seconds.

Note: This function will not work if the power button is locked as described in the section below.

Power Lockout

You are able to lock and unlock the Power button. The touchcomputer is defaulted in the unlocked position.

To lock the Power:

While the OSD is not displayed, press the Menu button and DOWN simultaneously for 2 seconds. A window will appear displaying "Power Unlocked". Continue to hold the buttons down for another 2 seconds. When the window toggles to "Power Locked" release both buttons to lock the Power button.

To unlock the Power:

Press the Menu button and DOWN simultaneously for 2 seconds. A window will appear displaying "Power locked". Continue to hold the buttons down for another 2 seconds. When the window toggles to "Power Unlocked" release both buttons to unlock the Power button.

Elo TouchSystems 17A2 User Guide 28

Image 28
Contents Touchcomputer User Guide LCD Multifunction Touchcomputer Elo TouchSystems Touchcomputer User GuideRevision D E926979 Elo TouchSystems Copyright c 2008 Tyco Electronics. All Rights Reserved DisclaimerTable of Contents Technical Support Setup Unpacking Your TouchcomputerProduct Overview Front View Rear ViewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Initial Turn-On Language SelectionPage Time-zone selection Test Devices Testing the TouchscreenCalibration Testing in USB MSR Keyboard KB Emulation Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Human Interface Device HID Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the DVD Drive optional Testing the Speaker Bar optionalChanging DVD region Testing the Wireless Card optional Testing the TV tuner optionalTesting the Cash Drawer Port Operation OSD Control OSD MenuOSD Lockout Shortcut keysTo lock the OSD To unlock the OSDPower Control Power ButtonPower Lockout To lock the PowerUsing the I/O panel TV Tuner optional PS/2 UniversalKensingtonTM Lock Securing the Touchcomputer Base Mounting OptionSnap off stand cover Mount as shownMounting Option Display Angle Upgrades Adding PeripheralsMaintenance Care and Handling of Your Touchcomputer Waste Electrical and Electronic Equipment Weee DirectiveTo Install the Hard Disk Drive Servicing the Hard Disk Drive and Compact Flash CardRecovering the Operating System To Install the Compact Flash CardTechnical Specifications Touchcomputer Specifications RAMPage RS422 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS485 Mode Pin Definitionfor COM2 only DB9 connector Pin Definition RJ45 connector Pin DefinitionPower Input Pin Definition Cash Drawer Port Signal Definition and Control ControlPage Page Display Specifications Power Supply Specifications Touchscreen Specifications Peripherals Specifications Magnetic Stripe Reader MSRCustomer Display USB VersionFingerprint Reader One-Dimensional scanner specifications Omni-Directional scanner Elo P/N E787026 specificationsUSB-SSI converter board Elo P/N E580321 specifications Barcode ScannerSpeaker Bar DVD Drive Wireless Card TV Tuner CardEnvironmental Specifications Temperature RangesHumidity AltitudeUsing the Touchcomputer Using the Web Using the PhoneTechnical Support Technical AssistanceRegulatory Information Electrical Safety InformationII. Emissions and Immunity Information Page III. Safety Label Warranty Page Check out Elo’s Website